BTech Course Structure and Syllabus
for Chemical Engineering (to
be applicable from 2010 batch onwards) |
||||||||||||
Course No. |
Course Name |
L |
T |
P |
C |
|
Course No. |
Course Name |
L |
T |
P |
C |
Semester - 1 |
|
Semester -2 |
||||||||||
CH101 |
Chemistry |
3 |
1 |
0 |
8 |
|
BT101 |
Modern
Biology |
3 |
0 |
0 |
6 |
CH110 |
Chemistry
Laboratory |
0 |
0 |
3 |
3 |
|
CS
101 |
Introduction
to Computing |
3 |
0 |
0 |
6 |
EE101 |
Electrical
Sciences |
3 |
1 |
0 |
8 |
|
CS110 |
Computing
Laboratory |
0 |
0 |
3 |
3 |
MA101 |
Mathematics
- I |
3 |
1 |
0 |
8 |
|
EE102 |
Basic
Electronics Laboratory |
0 |
0 |
3 |
3 |
ME
110/ PH
110 |
Workshop
/ Physics
Laboratory |
0 |
0 |
3 |
3 |
|
MA102 |
Mathematics
- II |
3 |
1 |
0 |
8 |
ME
111** |
Engineering
Drawing |
0 |
0 |
3 |
3 |
|
ME101 |
Engineering
Mechanics |
3 |
1 |
0 |
8 |
PH101 |
Physics
- I |
2 |
1 |
0 |
6 |
|
PH102 |
Physics
- II |
2 |
1 |
0 |
6 |
SA
101 |
Physical
Training -I |
0 |
0 |
2 |
0 |
|
PH
110/ ME
110 |
Physics
Laboratory/ Workshop
|
0 |
0 |
3 |
3 |
NCC/NSO/NSS |
0 |
0 |
2 |
0 |
|
SA
102 |
Physical
Training -II |
0 |
0 |
2 |
0 |
|
12 |
4 |
9 |
41 |
|
|
NCC/NSO/NSS |
0 |
0 |
2 |
0 |
||
** For 2010 batch the credit structure is 0-0-3-3 |
|
|
|
14 |
3 |
9 |
43 |
|||||
Semester 3 |
|
Semester 4 |
||||||||||
MA201 |
Mathematics - III |
3 |
1 |
0 |
8 |
|
CL204 |
Heat Transfer Operations |
3 |
1 |
0 |
8 |
CL201 |
Chemical Process Calculations |
2 |
1 |
0 |
6 |
|
CL205 |
Mass Transfer Operations - I |
2 |
1 |
0 |
6 |
CL202 |
Fluid Mechanics |
3 |
1 |
0 |
8 |
|
CL206 |
Process Equipment Design - I |
1 |
0 |
3 |
5 |
CL203 |
Chemical Engineering Thermodynamics - I |
2 |
1 |
0 |
6 |
|
CL207 |
Chemical Engineering Thermodynamics II |
2 |
1 |
0 |
6 |
ME212 |
Solid Mechanics - I |
2 |
1 |
0 |
6 |
|
HS2xx |
HSS Elective - II |
3 |
0 |
0 |
6 |
HS2xx |
HSS Elective - I |
3 |
0 |
0 |
6 |
|
CL210 |
Fluid Mechanics Lab |
0 |
0 |
3 |
3 |
SA
201 |
Physical
Training - III |
0 |
0 |
2 |
0 |
|
CL211 |
Thermodynamics Lab |
0 |
0 |
3 |
3 |
NCC/NSO/NSS |
0 |
0 |
2 |
0 |
|
SA
202 |
Physical
Training - IV |
0 |
0 |
2 |
0 |
|
15 |
5 |
0 |
40 |
|
|
NCC/NSO/NSS |
0 |
0 |
2 |
0 |
||
|
|
|
|
|
|
|
11 |
3 |
9 |
37 |
||
Semester 5 |
|
Semester 6 |
||||||||||
CL301 |
Solid and Fluid-Solid Operations |
3 |
0 |
0 |
6 |
|
CL307 |
Transport Phenomena |
2 |
1 |
0 |
6 |
CL303 |
Chemical Reaction Engineering - I |
2 |
1 |
0 |
6 |
|
CL308 |
Chemical Reaction Engineering II |
3 |
0 |
0 |
6 |
CL304 |
Process Equipment Design - II |
1 |
0 |
3 |
5 |
|
CL309 |
Process Control and Instrumentation |
3 |
1 |
0 |
8 |
CL306 |
Mass Transfer Operation - II |
2 |
1 |
0 |
6 |
|
CL314 |
Numerical Methods in Chemical Engineering |
2 |
0 |
2 |
6 |
HS3xx |
HSS Elective - III |
3 |
0 |
0 |
6 |
|
XXxxx |
Open Elective - I |
3 |
0 |
0 |
6 |
CL312 |
Heat Transfer Lab |
0 |
0 |
3 |
3 |
|
CL315 |
Mechanical Operation Lab |
0 |
0 |
3 |
3 |
CL313 |
Mass Transfer Lab |
0 |
0 |
3 |
3 |
|
|
|
13 |
2 |
5 |
35 |
11 |
2 |
9 |
35 |
|
|
|
|
|
|
|
||
Semester 7 |
|
Semester 8 |
||||||||||
CL402 |
Chemical Process Technology |
3 |
0 |
0 |
6 |
|
CL401 |
Process Design and Project Engineering |
3 |
1 |
0 |
8 |
CL403 |
Process Equipment Design - III |
2 |
0 |
2 |
6 |
|
CL404 |
Material Science |
3 |
0 |
0 |
6 |
CLxxx |
Departmental Elective - I |
3 |
0 |
0 |
6 |
|
CLxxx |
Departmental Elective - II |
3 |
0 |
0 |
6 |
XXxxx |
Open Elective - II |
3 |
0 |
0 |
6 |
|
HS4xx |
HSS Elective - IV |
3 |
0 |
0 |
6 |
CL416 |
Process Control Lab |
0 |
0 |
3 |
3 |
|
XX4xx |
Open Elective - III |
3 |
0 |
0 |
6 |
CL417 |
Chemical Reaction Engineering Lab |
0 |
0 |
3 |
3 |
|
CL499 |
Project - II |
0 |
0 |
6 |
6 |
CL498 |
Project - I |
0 |
0 |
6 |
6 |
|
|
|
15 |
1 |
6 |
38 |
11 |
0 |
14 |
36 |
|
|
|
|
|
|
|
CH 101 Chemistry (3-1-0-8) Structure
and Bonding; Origin of quantum theory, postulates of quantum mechanics;
Schrodinger wave equation: operators and observables, superposition theorem and
expectation values, solutions for particle in a box, harmonic oscillator,
rigid rotator, hydrogen atom; Selection rules of microwave and vibrational
spectroscopy; Spectroscopic term symbol; Molecular orbitals: LCAO-MO; Huckel
theory of conjugated systems; Rotational, vibrational and electronic
spectroscopy; Chemical Thermodynamics: The zeroth and first law, Work, heat,
energy and enthalpies; The relation between Cv and Cp;
Second law: entropy, free energy (the Helmholtz and Gibbs) and chemical
potential; Third law; Chemical equilibrium; Chemical kinetics: The rate of
reaction, elementary reaction and chain reaction; Surface: The properties of
liquid surface, surfactants, colloidal systems, solid surfaces, physisorption
and chemisorption; The periodic table of elements; Shapes of inorganic
compounds; Chemistry of materials; Coordination compounds: ligand,
nomenclature, isomerism, stereochemistry, valence bond, crystal field and
molecular orbital theories; Bioinorganic chemistry and organometallic chemistry;
Stereo and regio-chemistry of organic compounds, conformers; Pericyclic
reactions; Organic photochemistry; Bioorganic chemistry: Amino acids,
peptides, proteins, enzymes, carbohydrates, nucleic acids and lipids;
Macromolecules (polymers); Modern techniques in structural elucidation of
compounds (UV-vis, IR, NMR); Solid phase synthesis and combinatorial
chemistry; Green chemical processes. Texts:
1. P. W. Atkins, Physical Chemistry, 5th Ed., ELBS, 1994. 2. C.
N. Banwell, and E. M. McCash, Fundamentals
of Molecular Spectroscopy, 4th Ed., Tata McGraw-Hill, 1962. 3. F.
A. Cotton, and G. Wilkinson, Advanced
Inorganic Chemistry, 3rd Ed., Wiley Eastern Ltd., New Delhi,
1972, reprint in 1988. 4. D. J. Shriver, P. W. Atkins, and C. H.
Langford, Inorganic Chemistry, 2nd
Ed., ELBS ,1994. 5. S. H. Pine, Organic Chemistry, McGraw-Hill, 5th Ed., 1987 References: 1. I. A. Levine, Physical Chemistry, 4th Ed., McGraw-Hill, 1995. 2. I. A. Levine, Quantum Chemistry, EE Ed., prentice Hall, 1994. 3. G. M. Barrow, Introduction to Molecular Spectroscopy, International Edition,
McGraw-Hill, 1962 4. J.
E. Huheey, E. A. Keiter and R. L. Keiter, Inorganic
Chemistry: Principle, structure and reactivity, 4th Ed.,
Harper Collins, 1993 5. L. G. Wade (Jr.), Organic Chemistry, Prentice Hall, 1987. |
CS 101
Introduction to Computing (3-0-0-6)
Introduction:
The von Neumann architecture, machine language, assembly language, high level
programming languages, compiler, interpreter, loader, linker, text editors,
operating systems, flowchart; Basic features of programming (Using C): data
types, variables, operators,
expressions, statements, control structures, functions; Advanced
programming features: arrays and pointers, recursion, records (structures),
memory management, files, input/output, standard library functions,
programming tools, testing and debugging; Fundamental operations on data:
insert, delete, search, traverse and modify; Fundamental data structures:
arrays, stacks, queues, linked lists; Searching and sorting: linear search,
binary search, insertion-sort, bubble-sort, selection-sort, radix-sort,
counting-sort; Introduction to object-oriented programming Texts:
1. A Kelly and I Pohl, A Book on C, 4th Ed.,
Pearson Education, 1999. 2. A M Tenenbaum, Y Langsam and M J
Augenstein, Data Structures Using C,
Prentice Hall India, 1996. References: 1.
H Schildt, C: The Complete Reference,
4th Ed., Tata Mcgraw Hill, 2000 2. B Kernighan and
D Ritchie, The C Programming Language,
4th Ed., Prentice Hall of India, 1988. |
CS 110 Computing
Laboratory (0-0-3-3)
Programming
Laboratory will be set in consonance with the material covered in CS101. This
will include assignments in a programming language like C. References: 1.
B. Gottfried and J. Chhabra,
Programming With C, Tata Mcgraw Hill, 2005 MA 102 Mathematics
- II
(3-1-0-8) Vector functions of one variable –
continuity and differentiability; functions of several variables –
continuity, partial derivatives, directional derivatives, gradient,
differentiability, chain rule; tangent planes and normals, maxima and minima,
Lagrange multiplier method; repeated and multiple integrals with applications
to volume, surface area, moments of inertia, change of variables; vector
fields, line and surface integrals; Green’s, Gauss’ and
Stokes’ theorems and their applications. First order differential equations –
exact differential equations, integrating factors, Bernoulli equations,
existence and uniqueness theorem, applications; higher-order linear differential
equations – solutions of homogeneous and nonhomogeneous equations,
method of variation of parameters, operator method; series solutions of
linear differential equations, Legendre equation and Legendre polynomials,
Bessel equation and Bessel functions of first and second kinds; systems of
first-order equations, phase plane, critical points, stability. Texts: 1.
G. B. Thomas (Jr.) and R. L. Finney, Calculus and Analytic Geometry, 9th
Ed., Pearson Education India, 1996. 2.
S. L. Ross, Differential Equations, 3rd Ed., Wiley India,
1984. References: 1. T.
M. Apostol, Calculus - Vol.2, 2nd
Ed., Wiley India, 2003. 2. W.
E. Boyce and R. C. DiPrima, Elementary
Differential Equations and Boundary Value Problems, 9th Ed.,
Wiley India, 2009. 3. E.
A. Coddington, An Introduction to
Ordinary Differential Equations, Prentice Hall India, 1995. 4. E.
L. Ince, Ordinary Differential
Equations, Dover Publications, 1958. ME
101 Engineering
Mechanics (3-1-0-8) Basic principles:
Equivalent force system; Equations of equilibrium; Free body diagram;
Reaction; Static indeterminacy. Structures: Difference between trusses,
frames and beams, Assumptions followed in the analysis of structures; 2D
truss; Method of joints; Method of section; Frame; Simple beam; types of loading and supports; Shear Force and bending Moment diagram
in beams; Relation among load, shear force and bending moment. Friction: Dry
friction; Description and applications of friction in wedges, thrust bearing
(disk friction), belt, screw, journal bearing (Axle friction); Rolling
resistance. Virtual work and Energy method: Virtual Displacement; Principle
of virtual work; Applications of virtual work principle to machines;
Mechanical efficiency; Work of a force/couple (springs etc.); Potential
energy and equilibrium; stability. Center of Gravity and Moment of Inertia:
First and second moment of area; Radius of gyration; Parallel axis theorem; Product of inertia, Rotation of axes
and principal moment of inertia;
Moment of inertia of simple and composite bodies. Mass moment of
inertia. Kinematics of Particles: Rectilinear motion; Curvilinear motion; Use
of Cartesian, polar and spherical coordinate system; Relative and constrained
motion; Space curvilinear motion. Kinetics of Particles: Force, mass and
acceleration; Work and energy; Impulse and momentum; Impact problems; System
of particles. Kinematics and Kinetics of Rigid Bodies: Translation; Fixed
axis rotational; General plane
motion; Coriolis acceleration;
Work-energy; Power; Potential energy; Impulse-momentum and associated
conservation principles; Euler
equations of motion and its application. Texts 1. I. H. Shames, Engineering Mechanics:
Statics and Dynamics, 4th Ed., PHI, 2002. 2.
F. P. Beer and E. R. Johnston, Vector Mechanics for Engineers, Vol I - Statics, Vol II – Dynamics,
3rd Ed., Tata McGraw Hill, 2000. References 1. J.
L. Meriam and L. G. Kraige, Engineering Mechanics, Vol I – Statics, Vol II –
Dynamics, 5th Ed., John
Wiley, 2002. 2. R. C. Hibbler, Engineering Mechanics,
Vols. I and II, Pearson Press,
2002. PH 102 Physics
- II
(2-1-0-6) Vector Calculus: Gradient, Divergence and
Curl, Line, Surface, and Volume integrals, Gauss's divergence theorem and
Stokes' theorem in Cartesian, Spherical polar, and Cylindrical polar
coordinates, Dirac Delta function. Electrostatics: Gauss's law and its
applications, Divergence and Curl of Electrostatic fields, Electrostatic
Potential, Boundary conditions, Work and Energy, Conductors, Capacitors,
Laplace's equation, Method of images, Boundary value problems in Cartesian
Coordinate Systems, Dielectrics, Polarization, Bound Charges, Electric
displacement, Boundary conditions in dielectrics, Energy in dielectrics,
Forces on dielectrics. Magnetostatics: Lorentz force, Biot-Savart and
Ampere's laws and their applications, Divergence and Curl of Magnetostatic
fields, Magnetic vector Potential, Force and torque on a magnetic dipole,
Magnetic materials, Magnetization, Bound currents, Boundary conditions. Electrodynamics: Ohm's law, Motional EMF, Faraday's
law, Lenz's law, Self and Mutual inductance, Energy stored in magnetic field,
Maxwell's equations, Continuity Equation, Poynting Theorem, Wave solution of
Maxwell Equations. Electromagnetic waves: Polarization, reflection
& transmission at oblique incidences. Texts:
References:
EE 102 Basic Electronics Laboratory (0-0-3-3) Experiments using diodes
and bipolar junction transistor (BJT): design and analysis of half -wave and
full-wave rectifiers, clipping circuits and Zener regulators, BJT
characteristics and BJT amplifiers; experiments using operational amplifiers (op-amps):
summing amplifier, comparator, precision rectifier, astable and monostable
multivibrators and oscillators; experiments using logic gates: combinational
circuits such as staircase switch, majority detector, equality detector,
multiplexer and demultiplexer; experiments using flip-flops: sequential
circuits such as non-overlapping pulse generator, ripple counter, synchronous
counter, pulse counter and numerical display.
3.
R.J. Tocci, Digital Systems, 6th Ed., 2001. |
CL 201
Chemical Process Calculations
(2-1-0-6) Steady-state and dynamic processes; lumped and
distributed processes; single and multi-phase systems; correlations for
physical and transport properties; equilibrium relations; ideal gases and
gaseous mixtures; vapor pressure; Vapor liquid equilibrium; Material
balances: non-reacting single-phase systems; systems with recycle, bypass and
purge; processes involving vaporization and condensation. Intensive and
extensive variables; rate laws; calculation of enthalpy change; heat of
reaction; fuel calculations; saturation humidity, humidity charts and their
use; energy balance calculations; flow-sheeting; degrees of freedom and its
importance in flow-sheeting. Texts: 1. R.
M. Felder and R. W.Rousseau, Elementary
principles of chemical processes, 3rd Ed., Wiley, 1999. 2. D. M. Himmelblau, Basic Principles and Calculations in
Chemical Engineering, 6th Ed., Prentice Hall of India, 2001. References:
1. N. Chopey, Handbook of Chemical Engineering Calculations, 3rd Ed., Mc-Graw Hill, 2004 2. A. Olaf, K.M. Watson and R. A. R.Hougen, Chemical Process Principles, Part 1: Material and Energy Balances, John Wiley & Sons, 1968 |
CL
202 Fluid
Mechanics (3-1-0-8) Properties and classification of fluids;
fluid statics; velocity field; stream function; irrotational flow; integral
and differential analysis for fluid motion: Reynolds' transport theorem;
Navier-Stoke's equation; Euler & Bernoulli's equation; dimensional
analysis and similitude; internal and external fluid flow: friction factor;
energy losses in fittings, valves etc.; flow measuring devices; fluid
machinery: pump, blower; agitation; introduction to non-Newtonian fluid;
introduction to compressible flow. Texts: 1.
R. W. Fox and A. T. McDonald, Introduction to fluid mechanics, 5th Ed., John
Wiley & Sons, 1998. 2.
W. L. McCabe, J. Smith and P. Harriot, Unit Operations of Chemical Engineering, 6th Ed.,
McGraw - Hill, International Edition, 2001. References: 1.
B.
R. Bird, E. W. Stewart, and N. E. Lightfoot, Transport Phenomena, John Wiley & Sons, 2nd Ed., 2003. 2.
J. M. Coulson and J.F. Richardson, Chemical Engineering, Vol-1: Fluid flow,
Heat Transfer and Mass Transfer, Pergamon Press, 4th Ed.,
1990. |
CL
203 Chemical Engineering Thermodynamics - I (2-1-0-6) Thermodynamic systems; thermodynamic laws;
equations of state; reversible and irreversible processes; entropy;
application of first and second laws to steady/unsteady processes in
open/closed systems; Gibbs and Helmholtz free energies; chemical potential and
criteria of equilibrium; Maxwell equations and thermodynamic properties of
pure substances; phase equilibria; chemical reaction equilibria; homogeneous
reaction system. Text: 1. J. M. Smith, H. C.
V. Ness and M. M. Abott, Introduction
to Chemical Engg. Thermodynamics, 7th Ed., McGraw Hill
International Edition, 2010. Reference: 1.
S. I. Sandler, Chemical
Engg. Thermodynamics, Wiley, New York, 1977. |
CL
204 Heat
Transfer Operation
(3-1-0-8) Basic modes of heat transfer. Conduction:
basic equations of one-dimensional, two-dimensional and three-dimensional
conduction; steady conduction in slabs, cylinders and spheres; critical
thickness of insulation; transient conduction: analytical solution for slabs;
use of transient temperature charts for slabs, cylinders, and spheres; lumped
system of analysis. Convection: equation of motion; equation of energy;
hydrodynamic and thermal boundary layers; forced convection inside tubes,
over cylinders and spheres; natural convection, Empirical equations for free
and forced convection; boiling and condensation heat transfer; basic types of
heat exchangers; overall heat transfer coefficient; LMTD method,
effectiveness-NTU method. Radiation: black body and gray body radiation;
shape factor; Kirchhoff's law; Radiation shields; radiation from gases.
Evaporation: evaporator capacity, economy and types; single and multiple
effect evaporators, forward and backward feed evaporation, evaporator
calculations. Texts: 1.
J. P. Holman, Heat
Transfer, 8th Ed., McGraw - Hill, 1997. 2.
B. K. Dutta, Heat
Transfer, Prentice Hall of India, 2001. References: 1.
D.Q. Kern, Process
Heat Transfer, 2nd Ed., Tata McGraw - Hill, 1997. 2.
W. L. McCabe, J. Smith and P. Harriot, Unit Operations of Chemical Engineering,
6th Ed., McGraw - Hill, International Edition, 2001. |
CL
205
Mass Transfer Operation - I
(2-1-0-6) Concepts of molecular diffusion and mass transfer
coefficient; interphase mass transfer; the equilibrium stage approximation;
conservation relations; reflux; constant molal overflow; batch distillation;
Ponchon-Savarit and McCabe- Thiele analysis of binary distillation;
introduction to multi-component distillation; equilibrium solubility of gases
in liquids; counter-current multi-stage absorption; continuous contact
equipment; multi-component systems; absorption with chemical reaction Texts: 1.
R.
E. Treybal, Mass Transfer Operations,
3rd Ed., McGraw -Hill International Edition, 1981. 2.
B.K. Dutta, Principles of Mass Transfer and Separation Processes, 1st
Ed., Prentice Hall of India, 2007. References: 1.
W. L.
McCabe, J. Smith and P. Harriot, Unit
Operations of Chemical Engineering, 6th Ed., McGraw - Hill
International Edition, 2001 2. P.
C. Wankat, Equilibrium-Staged
Separations, Prentice Hall, 1989 3. C.
J. Geankoplis, Transport Processes and
Unit Operations, 3rd Ed., Prentice Hall, India,1993. |
CL
206 Process
Equipment Design - I (1-0-3-5) Design of pressure vessel and vessel
accessories like heads, nozzles, flanges, openings and supports; computer
aided design (CAD) of heat exchanger; mechanical and fabricational aspects.
Design of condenser, reboiler, and evaporator. Texts: 1.
B. C. Bhattacharyya, Introduction to Chemical Equipment Design, CBS Publishers &
Distributors, New Delhi, 2003. 2.
J. M. Coulson, J. F.Richardson and R. K. Sinnot, Coulson and Richardson's Chemical Engineering: Chemical Engineering
Design (Vol. 6), 3rd Ed.(Indian Print),
Butterworth-Heinemann, 2004. References: 1.
E. Ludwig, Chemical
Process Equipment Design, 3rd Ed., Gulf Pub., 2002. 2.
S.
M. Walas, Chemical Process
Equipment Selection and Design, Butterworth-Heinemann, 1999. 3.
J. Douglas, Conceptual
Design of Chemical Processes, Mc Graw-Hill, 1988. |
CL
207 Chemical Engineering Thermodynamics - II
(2-1-0-6) Pre-requisite: CL 203 or equivalent Chemical potential and criteria of
equilibrium ; phase equilibria; phase-rule; partial molar quantities;
Gibbs-Duhem Equation; thermodynamics of ideal and non-ideal solutions; excess
properties; fugacity and activity coefficient models; vapour-liquid and
liquid-liquid equilibria; solid-liquid equilibria; solubility of gases in
liquids; chemical reaction equilibria; homogeneous reaction system ;
heterogeneous reaction system; multiple reactions, work of separation. Texts: 1.
J. M. Smith, H. C. V. Ness and M. M. Abott, Introduction to Chemical Engg.
Thermodynamics, 7th. Ed., McGraw Hill, International Edition,
2010. References: 1. S.
I. Sandler, Chemical Engg.
Thermodynamics, Wiley, New York, 1977. 2. J.
M. Prasusnitz, R. N. Lichtenthaler, and E. G. de Azevedo, Molecular Thermodynamics of Fluid-Phase
Equilibria, Prentice Hall, Inc., 1986. 3. S.
I. Sandler, Chemical, Biochemical and
Engineering Thermodynamics, 4th Ed., Wiley India, 2006. |
CL
210 Fluid Mechanics Laboratory
(0-0-3-3) Pre-requisite:
CL 202 or equivalent. Laboratory experiments on Fluid flow, which
include basic experiments on flow through pipes, channels, nozzles, packed
beds, pipe-fittings and flow meters, pump test rigs, etc. Text: 1.
R. W. Fox and A. T. McDonald, Introduction to fluid mechanics, 5th Ed., John
Wiley & Sons, 1998. Reference: 1.
W. L. McCabe, J. Smith and P. Harriot, Unit Operations of Chemical Engineering,
6th Ed., McGraw - Hill, International Edition, 2001. |
CL
211
Thermodynamics Laboratory (0-0-3-3) Pre-requisite:
CL 203 or equivalent Laboratory experiments on Chemical Engineering
Thermodynamics, which include basic experiments on vapor pressure estimation,
vapour - liquid equilibrium; liquid - liquid equilibrium; heat of reaction;
Joule - Thomson coefficient experiment and Equilibrium flash Distillation. Texts/References: 1. J. M. Smith, H. C. V. Ness and M.
M. Abott, Introduction to Chemical
Engg. Thermodynamics, 7th Ed., McGraw Hill, International
Edition, 2010. 2. S. I. Sandler, Chemical Engg. Thermodynamics, Wiley,
New York, 1977. 3. S.
I. Sandler, Chemical, Biochemical and
Engineering Thermodynamics, 4th Ed., Wiley India,
2006. |
CL
301 Solid and
Fluid-Solid Operations (3-0-0-6) Particles: particle size and shape; particulate
mass, size and shape distribution; measurement and analysis of average
particle diameter. Size reduction: crushing, grinding and ultra-fine
grinding; laws of grinding; size enlargement; agglomeration; screening and
design of screens. Storage of solids; flow of solids by gravity;
transportation of solids. Fluid solid systems: fluid particle interaction;
forces on submerged bodies; flow around single particle; drag force and drag
coefficient; settling velocity of a single particle in a fluid; hindered
settling of particles; design of thickeners; gravity separation; heavy media
separation; mineral jigs; tabling; flotation; packed bed; filtration; flow
through packed bed and fluidized beds; cyclones; bag filters; centrifuges;
hydro-cyclones; particle collection systems. Text: 1.
W. L. McCabe, J. Smith and P. Harriot, Unit Operations of Chemical Engineering,
6th Ed., McGraw - Hill, International Edition, 2001. References: 1.
W. L. Badgerand J. T. Banchero, Introduction to Chemical Engineering,
Tata McGraw-Hill, International Edition, 1997. 2.
C. J. Geankoplis, Transport Processes and Unit Operations, 3rd Ed., Prentice Hall, India,1993. |
CL
303 Chemical Reaction
Engineering - I
(2-1-0-6) Classification of chemical reactions;
single, multiple, elementary and nonelementary homogeneous reactions; order
and molecularity; temperature dependency; constant and variable volume batch
reactor; reaction rate; rate constant; collection and interpretation of
kinetic data; parallel and series reaction; batch, ideal plug flow and CSTR
reactor design with and without recycle; temperature and pressure effects;
Residence Time Distribution. Texts: 1.
H. S. Fogler, Elements
of Chemical Reaction Engineering, Prentice Hall, 2nd Ed., New Jersey, 1992. 2.
O. Levenspiel, Chemical
Reaction Engineering, 2nd Ed., Wiley Eastern, 1972. Reference: 1.
J. M. Smith, Chemical
Engineering Kinetics, 3rd Ed., McGraw Hill, 1980. |
CL
304 Process Equipment
Design - II
(1-0-3-5) Pre-requisite: CL205 or equivalent Computer aided design of sieve tray & packed
bed absorption and distillation column, liquid-liquid extraction systems,
dryer, adsorber, humidification chamber, reactors etc. Texts: 1.
E. Ludwig, Chemical Process Equipment Design, 3rd Ed., Gulf Pub.,
2002 . 2.
J. Douglas, Conceptual
Design of Chemical Processes, Mc Graw-Hill, 1988 References: 1.
B. C. Bhattacharyya, Introduction to Chemical Equipment Design, CBS Publishers & Distributors,
New Delhi, 2003. 2.
S. M.
Walas, Chemical Process Equipment
Selection and Design, Butterworth-Heinemann, 1999. 3.
J. M. Coulson, J. F.Richardson and R. K. Sinnot, Coulson and Richardson's Chemical Engineering: Chemical Engineering
Design (Vol. 6), 3rd Ed. (Indian Print),
Butterworth-Heinemann, 2004. |
CL
306 Mass Transfer Operation - II
(2-1-0-6) Pre-requisite: CL 205 or equivalent Simultaneous Heat and Mass Transfer;
Drying: rate of drying for batch and continuous dryers; Humidification and
Dehumidification: design of cooling towers; Adsorption: types and nature of
adsorption, isotherm, stage wise and continuous adsorption; fixed, fluidized
and moving beds; ion-exchange; Extraction: triangular diagram; Leaching:
single and multistage operation, equipment for leaching; Crystallization:
Millers theory, yield calculations, crystallizers; Membrane processes: liquid
& gas separation processes, microfiltration, ultra-filtration,
nanofiltration, reverse osmosis. Texts: 1.
R.
E. Treybal, Mass Transfer Operations,
3rd Ed., McGraw -Hill International Edition, 1981. 2.
B.K. Dutta, Principles of Mass Transfer and Separation Processes, 1st
Ed., Prentice Hall of India, 2007. References: 1.
W. L. McCabe, J. Smith and P. Harriot, Unit Operations of Chemical Engineering,
6th Ed., McGraw-Hill International Edition, 2001
2. P.
C. Wankat, Equilibrium-Staged
Separations, Prentice Hall, 1989 3. C.
J. Geankoplis, Transport Processes and
Unit Operations, 3rd Ed., Prentice Hall, India, 1993. |
CL
312 Heat Transfer Laboratory (0-0-3-3) Pre-requisite:
CL 204 or equivalent Laboratory experiments on Heat transfer
operations, which include basic experiments on conduction, convection,
condensation, heat exchanger, etc. Texts: 1.
W. L. McCabe, J. Smith and P. Harriot, Unit Operations of Chemical Engineering,
6th Ed., McGraw – Hill, International Edition, 2001. 2.
J. P. Holman, Heat
Transfer, 8th Ed., McGraw - Hill, 1997 Reference: 1.
D.Q. Kern, Process
Heat Transfer, 2nd Ed.,Tata McGraw - Hill, 1997. |
CL
313
Mass Transfer Laboratory
(0-0-3-3) Pre-requisite:
CL 205 or equivalent Laboratory experiments on mass transfer operations,
which include basic experiments on distillation, absorption, crystallization,
diffusion, drying, mass transfer with & without chemical reaction,
cooling tower, etc. Text: 1.
W. L. McCabe, J. Smith and P. Harriot, Unit Operations of Chemical Engineering,
6th Ed., McGraw – Hill,
International Edition, 2001. Reference: 1.
R. E. Treybal, Mass
Transfer Operations, 3rd Ed., McGraw –Hill,
International Edition, 1981. |
CL
307 Transport Phenomena
(2-1-0-6) Introduction to transport phenomena;
molecular transport mechanisms and general properties; analogies amongst
momentum, heat, and mass transport; boundary layer analysis for momentum,
heat, & mass transfer; estimation of transport coefficient, non-Newtonian
fluids, rheological characteristics of materials, agitation of non-Newtonian
fluids. Heat & mass transfer with chemical reaction; Diffusion and
chemical reaction inside a porous catalyst. Text: 1.
B. R. Bird, E. W. Stewart, N. E. Lightfoot, Transport Phenomena, 2nd
Ed., John Wiley & Sons, 2003. References: 1.
J. W. Thomson, Introduction
to Transport Phenomena, Pearson Education Asia, 2001. 2.
R. E. Treybal, Mass
Transfer Operations, 3rd Ed., McGraw -Hill International
Edition, 1981 3.
J. P. Holman, Heat
Transfer, 8th Ed., McGraw - Hill, 1997. |
CL
308 Chemical Reaction
Engineering - II
(2-1-0-6) Pre-requisite:
CL 303 or equivalent Heterogeneous reaction kinetics;
selectivity; heterogeneous reactors: fluid-solid catalytic fixed bed reactor
design principles; isothermal, adiabatic and non-isothermal operations;
gas-solid non-catalytic reactor design; fluidized bed reactors; thermal
stability in reactor operation. Texts: 1.
H. S. Fogler, Elements
of Chemical Reaction Engineering, 2nd Ed., Prentice Hall, New Jersey,
1992. 2.
O. Levenspiel, Chemical
Reaction Engineering, 2nd Ed., Wiley Eastern, 1972. Reference: 1.
J. M. Smith, Chemical
Engineering Kinetics, 3rd Ed., McGraw Hill, 1980. |
CL
309 Process Control
and Instrumentation ( 3-1-0-8) First Principles model development; dynamics
of first, second and higher order linear systems, open loop and closed loop
systems; linearisation; feed back control; stability; root locus diagram;
frequency response analysis; Bode stability criterion; Nyquist stability
criterion; design of controller; dynamics of some complex processes; control
valves and introduction to real time computer control of process equipment;
cascade, feed forward, adaptive control; SISO; MIMO; A/D conversion, PLC
architecture; Multi-variable control strategies. Text: 1.
G. Stephanopoulos, Chemical Process Control: An Introduction to Theory and Practice,
Prentice-Hall, New Jersey, 1984. References: 1.
D. R. Coughanowr, and L. B. Koppel, Process systems Analysis and Control, 2nd Ed., Mc-Graw-Hill,
1991.
2. W.
L. Luyben, Process Modelling Simulation
and Control for Chemical Engineers, McGraw Hill, 1990 |
CL
314 Numerical Methods in Chemical Engineering
(2-0-2-6) Solution of simultaneous linear and non-linear
equations; Eigenvalues and eigenvectors of matrixes; Statistical analysis of
data; Curve fitting; Approximation of functions; Interpolation; Numerical
integration and differentiation; Solution of ordinary differential equations
- initial and boundary value problems; Solution of partial differential
equations; Analysis of error and stability in numerical computing;
Implementation of numerical methods on computer through programming in
FORTRAN/C++ and commercial software such as MATLAB, NAG and IMSL routines. Texts: 1.
S. C. Chapra and R. P. Canale, Numerical methods for engineers, Tata-McGraw-Hill, 2002. 2.
S. K. Gupta, Numerical
methods for engineers, New Age International, 2001. References: 1.
A. Constantinides, Numerical
methods with personal computers, McGraw-Hill, 1987. 2.
F. Gerald, and P. O. Wheatley, Applied
numerical methods, Pearson Education, 2003. 3.
R. M. Somasundaram and R. M. Chandrasekaran, Numerical methods with C++ programming, Prentice-Hall
of India, 2005. 4.
W. H. Press, S. A. Teukolsky, W. T. Vellerling and B. P. Flannery, Numerical recipes in FORTRAN:
the art of scientific programming, Cambridge
University Press, 1992. |
CL
315 Mechanical Operation Laboratory
(0-0-3-3) Pre-requisite: CL 301 or equivalent This includes basic experiments on size
reduction and size separation, filtration, settling, centrifuging,
classification, gas-solid separation. Text: 1.
W. L. McCabe, J. Smith and P. Harriot, Unit Operations of Chemical Engineering,
6th Ed., McGraw - Hill, International Edition, 2001. References: 1.
W. L. Badger and J. T. Banchero, Introduction to Chemical Engineering,
Tata McGraw-Hill, International Edition, 1997. 2.
C. J. Geankoplis, Transport Processes and Unit Operations, 3rd Ed.,
Prentice Hall, India, 1993. |
CL
402 Chemical Process
Technology (3-0-0-6) Raw materials and principles of production
of olefins and aromatics; typical intermediates from olefins and aromatics
such as ethylene glycol, ethyl benzene, phenol, cumene and DMT, dyes, and
pharmaceuticals; chemical processes based on raw materials sugar, starch,
alcohol, cellulose, paper, glyceride, oils, soaps, detergents; industrial
processes for the production of inorganic heavy chemicals such as acids,
alkalis, salts, and fertilizers such as sulphuric, nitric, and phosphoric
acids, soda ash, ammonia, etc. Text: 1.
C. L. Dryden, Outlines
of Chemical Technology, Edited and Revised by M.Gopala Rao and S.
Marshall , 3rd Ed., Affiliated East West, New Delhi, 1997. References: 1.
T. G. Austin and S. Shreve, Chemical Process Industries, 5th Ed., McGraw Hill, New
Delhi, 1984. 2.
R. E. Kirk, and D. F. Othmer, Encyclopaedia of Chemical Technology, 4th Ed.,
Interscience,
New York, 1991. 3.
P. H. Groggins, Unit Processes in Organic Synthesis, 5th Ed., McGraw
Hill, 1984. |
CL
403
Process Equipment Design - III
( 2-0-2-6) Pre-requisite: CL 205 or equivalent Principles of heat integration: Setting
energy targets, Problem table algorithm, heat recovery pinch, heat exchanger
network (HEN) representation, HEN design for maximum recovery, stream splitting,
capital energy tradeoffs; Principles of multi-component distillation: Basic
distillation design, sequencing of simple distillation columns, complex
distillation columns, short-cut modeling of complex columns; Design of
azeotropic and extractive distillation systems using residue curve maps. Texts: 1. S. M. Walas, Chemical Process Equipment Selection and Design,
Butterworth-Heinemann, 1999. 2.
J. Douglas, Conceptual Design of
Chemical Processes, McGraw-Hill, 1988 References: 1.
B. C. Bhattacharyya, Introduction
to Chemical Equipment Design, CBS Publishers & Distributors, New
Delhi, 2003. 2.
E. Ludwig, Chemical
Process Equipment Design, 3rd Ed., Gulf Pub., 2002. 3.
G. K. Sahu, Handbook of
Piping Design, New Age Publisher, 2002. 4.
R. Smith, Chemical
Process Design, McGraw Hill, New York, 1995. 5.
L.T. Biegler, I.E. Grossmann and A.W. Westerberg, Systematic Methods of Chemical Process
Design, Prentice Hall,
International Series, 1997 6.
J. M. Coulson, J. F.Richardson and R. K. Sinnot, Coulson and Richardson's Chemical Engineering: Chemical Engineering
Design (Vol. 6), 3rd Ed. (Indian Print), Butterworth -
Heinemann, 2004. |
CL
416 Process Control Laboratory
(0-0-3-3) Pre-requisite:
CL 309 or equivalent Laboratory experiments on process control
& instrumentation, which include basic experiments on controlling namely
pressure, temperature, flow and level. The cascade control and control valve
characterization etc are also covered in this course. Texts/References: 1. G.
Stephanopoulos, Chemical Process
Control: An Introduction to Theory and Practice,
Prentice-Hall, New Jersey,1984. 2. D.
R. Coughanowr and L. B. Koppel, Process
systems Analysis and Control, 2nd Ed., Mc-Graw-Hill,
1991.
3. W.
L. Luyben, Process Modelling Simulation
and Control for Chemical Engineers, McGraw Hill, 1990. |
CL
417 Chemical
Reaction Engineering Laboratory (0-0-3-3) Pre-requisite:
CL 303 plus CL 308 or equivalent Laboratory experiments on reaction
engineering which include basic experiments on different types of reactors
with residence time distribution (RTD) study. Texts: 1.
O. Levenspiel, Chemical
Reaction Engineering, 2nd Ed., Wiley Eastern1972. References: 1.
H. S. Fogler, Elements
of Chemical Reaction Engineering, 2nd Ed., Prentice Hall, New
Jersey, 1992. 2.
J. M. Smith, Chemical
Engineering Kinetics, 3rd Ed., McGraw Hill, 1980. |
CL
401 Process
Design & Project Engineering (3-1-0-8) Pre-requisite:
CL 403 or equivalent Input information and batch versus
continuous; input-output structure of the flow sheet; recycle structure of
the flowsheet; application of separation system principles for case studies;
application of heat exchanger network design principles for case studies;
cost diagrams and quick screening of process alternatives; preliminary
process optimization; process retrofitting.
Equipment sizing and costing for different
process units; Cost information, estimating capital and operating
costs, total capital investment and total product costs, time value of money,
measures of process profitability, simplifying economic analysis for
conceptual designs, techno-economic feasibility report writing. Texts: 1.
J. Douglas, Conceptual
Design of Chemical Processes, McGraw Hill, 1989. 2.
P. Timmerhaus, Plant
Design and Economics for Chemical Engineers, 4th Ed,
McGraw-Hill, 1991. References: 1.
L.T. Biegler, I.E. Grossmann, A.W. Westerberg, Systematic Methods of Chemical Process
Design, Prentice Hall, International Series, 1997 2.
R. Smith, Chemical
Process Design, McGraw Hill, New York, 1995. 3.
E. E. Ludwig, Applied
Project Engineering, 2nd Ed., Gulf Publishing Company,
Houston, 1988. |
CL
404 Material
Science
(3-0-0-6) Atomic structure and interatomic bonding;
structure of crystalline solids; imperfections; diffusion; Mechanical
properties of metals; dislocation; strengthening; failure; phase diagram;
structure, properties, applications, processing of ceramics and polymers;
composites; corrosion degradation of materials; corrosion protection;
electrical, thermal, magnetic and optical properties; property requirements
and material selection. Text: 1.
V. Raghavan, V., Material Science & Engineering, Prentice Hall, 1996. References: 1.
W. D. Callister (Jr.), Material
Science and Engineering - an Introduction, 6th Ed., John Wiley
& Sons, 2003. 2.
J.F. Shackelford and W. Alexander, Material Science and Engineering Handbook, 3rd Ed.,
CRC, 2000. |
BTECH ELECTIVES |
CL 420
Polymer
Technology
(
3-0-0-6) Classification
of polymerization reactions such as condensation, free radical, ionic,
coordination reactions, their mechanism and rate; suspension and emulsion
polymerization; copolymerization; batch and continuous reactors; different
molecular weights with methods of determination; molecular weight
distribution; crystalline and amorphous structure; viscoelasticity; rubber
elasticity; glass transition; production of plastics, rubbers, fibers;
polymer rheology; polymer processing; analysis using non-Newtonian fluid
model. Text/References: 1. J. R.
Fried, Polymer Science & Technology,
Prentice Hall of India, 2000. 2. P.
Bahadur and N. V. Sastry, Principles of
Polymer Science, Narosa Publishing House, 2002. 3. V. R.
Gowariker, N. V. Viswanathan and J. Sreedhar, Polymer science, New Age International (P) LTd., 2001. |
CL 421
Biochemical
Engineering (3-0-0-6) Introduction. Microbiology: Cell structure, characterization,
classification of microorganisms; environmental and industrial microbiology;
cell nutrients and growth media. Chemicals
of Life: Repetitive and non repetitive biological polymers, lipids, fatty
acids and other related lipids, carbohydrates, mono-, di- and
polysaccharides, amino acids and proteins, structure of proteins,
protein denaturation and renaturation, antibodies, nucleic acids, nucleotides
to RNA and DNA, DNA double helix
model. Kinetics of Enzyme-Catalyzed
Reactions: Chemical kinetics fundamentals, introduction to enzymes,
classification of enzymes, enzymes of industrial importance, enzyme catalyzed
reactions and kinetics, determination of kinetic parameters, inhibitors and
inhibition kinetics, enzyme deactivation, immobilized enzyme technology. Metabolism and Bioenergetics:
Thermodynamic principles, metabolic pathways for carbohydrates, lipids and
proteins; ATP, TCA cycles etc. Cell
Growth and Product Formation: Growth patterns and kinetics in batch
culture, models with growth inhibitors, the ideal chemostat; Stochiometry of
microbial growth, theoretical prediction of yield coefficients. Bioprocess
Systems: Transport phenomena in bioprocesses, mass transfer in bioreactors,
solid-liquid mass transfer, power requirement, heat transfer; Various types
of bioreactors, Scale-up and its difficulties; Downstream Processing: Strategies to recover and purify products Control of microorganism: Control
fundamentals, antimicrobial action, control of microorganisms by physical and
chemical method. Texts/References: 1.
J. E. Bailey and D. F. Ollis, Biochemical
Engineering Fundamentals, 2nd Ed., McGraw Hill, 1986. 2.
B. Atkinson, Biochemical
Reactors, Pion Ltd., London, 1974. 3.
S. Aiba, A. E. Humhrey and N. F. Mills, Biochemical Engineering, 2nd Ed., Academic Press, New
York, 1973. 4. M. L. Schuler and F. Kargi, Bioprocess Engineering: Basic Concepts,
2nd Ed., Prentice Hall, International Series, 2002. |
CL 422
Process
Plant Safety
(3-0-0-6) Concepts
and definition; safety culture; storage of dangerous materials; plant layout;
safety systems; technology and process selection; scale of disaster; vapor
cloud explosions; control of toxic chemicals; runaway reactions; relief
systems; risk and hazard management; safety versus production; risk
assessment and analysis; hazard models and risk data; identification,
minimization, and analysis of hazard; tackling disasters: plan of emergency;
risk management routines; emergency shut down systems; human element in the
design of safety. Texts/References: 1.
P. C. Nicholas, Safety
management practices for hazard waste materials, Dekker, 1996. 2.
F. P. Lees, Loss
Prevention in Process Industries, Vols.1 and 2, Butterworth, 1983. 3.
W. E. Baker, Explosion
Hazards and Evaluation, Elsevier, Amsterdam, 1983. 4.
O. P. Kharbanda and E.A.Stallworthy, Management of Disasters and How to Prevent Them, Grower, 1986. |
CL 423
Non-traditional Optimization Techniques
(3-0-0-6) Non-traditional
optimization techniques; population based search algorithms; evolutionary
strategies; evolutionary programming; simulated annealing; genetic algorithm;
differential evolution; different strategies of differential evolution;
memetic algorithms; scatter search; ant colony optimization; self-organizing
migrating algorithm; other emerging hybrid evolutionary computation
techniques; engineering applications involving highly non-linear process with
many constraints and multi-objective optimization problems. Texts/References: 1.
T. F. Edgar and D. M. Himmelblau, Optimization of Chemical Processes, McGraw Hill, 2.
International Editions: Chemical Engineering Series, 1989. 3.
G. S. Beveridge, and R.S. Schechter, Optimization Theory and Practice, McGraw Hill,
New York, 1970. 4.
G. V. Rekllaitis, A. Ravindran and K. M. Ragsdell, Engineering Optimization- Methods and Applications, John
Wiley, New York, 1983. |
CL 424
Environmental Pollution
Control (3-0-0-6) Sources
of water, air and land pollution; environmental laws & standards; design
of pollution abatement systems for particulate matter and gaseous
constituents; hazardous waste disposal and treatment; solid-waste disposal
and recovery of useful products; specification of clean
technologies and recovery schemes of useful chemicals; pollution prevention
through process modification; recovery of by-products; energy recovery; waste
utilization and recycle and reuse and waste generation minimization;
design of control equipment and systems. Text/References: 1.
S.P. Mahajan, Pollution Control
in Process Industries, Tata-McGraw Hill, 1985. 2. N. L.
Nemerow, Liquid waste of Industry -
Theories, Practices and Treatment, Addison Weseley, NewYork,
1971. 3. W.
J. Weber, Physico-Chemical Processes
for Water Quality Control, Wiley Interscience, New York,1969. 4. W.
Strauss, Industrial gas Cleaning,
Pergamon, London, 1975. 5.
A.C. Stern, Air Pollution, Vols. I to
VI, Academic Press, New York 1968. CL 425
Novel Separation
Techniques
(3-0-0-6) Concepts
and definitions in adsorption; adsorbents types; their preparation and
properties; different types of adsorption isotherms and their importance;
adsorption types; basic mathematical
modeling with suitable initial and boundary conditions for different cases
such as thermal swing, pressure swing, and moving bed adsorption;
chromatography; membrane classification, chemistry, structure and
characteristics; resistances for mass transfer; design consideration for
reverse osmosis, ultrafiltration and electrodialysis; pervaporation; gaseous
separations; liquid membrane; introduction to other processes such as
reactive distillation, supercritical fluid extraction, biofiltration, etc. Text/References: 1.
P.C. Wankat, Large Scale
Adsorption and Chromatography, CRC Press, Boca Raton, 1986. 2. D. M.
Ruthven, Principles of adsorption and
adsorption processes, John Wiley & sons, 1984. 3. D.
M. Ruthven, S. Farooq and K. S. Knaebel, Pressure Swing Adsorption, Wiley-VCH, 1994. 4. S.
Sourirajan and T. Matsura, Reverse
Osmosis and Ultra-filtration-Process Principles, NRC Publication, Ottawa, 1985. 5. J.
G. S. Marcano and T. T. Tsotsis, Catalytic
membranes and membrane reactor, John Wiley, 2002. 6.
M.A. McHugh and V. J. Krukonis, Supercritical
fluid extraction, Butterworths, Boston, 1985. |
CL 426 Introduction
to Interfacial Science & Engineering (3-0-0-6) Phenomenology
of colloidal materials; Brownian diffusion; long range van der Waals forces;
double layer forces and short range forces; DLVO theory of stability of
lyphobic colloids; electrokinetic phenomena; association colloids;
interfacial tension; wetting and contact angle;
capillary hydrostatics; interfacial rheology and stability; some selected
applications of principles of colloid and interface science in detergents,
personal products, pharmaceuticals, food, textile, paint and petroleum
industries. Text/References : 1. P.
C. Hiemenz and R.Rajgopalan, Principles
of Colloid and Surface Chemistry, 3rd Ed., Dekker, 1997.
2. C.
A. Miller, and P.Neogi, Interfacial
Phenomena : Equilibrium and Dynamic Effects, Dekker, 1985. 3.
V.G. Levich, Physicochemical
Hydrodynamics, Prentice Hall Inc., 1962. 4.
R.J. Hunter, Foundations of
Colloid Science, Vols. I and II, Oxford Science Publications, 1989. 5. D. A. Edwards, H. Brenner and D.
T. Wasan, Interfacial Transport
Processes and Rheology,Butterworth, Heinmen, 1991. CL 427
Petroleum Refinery &
Petrochemicals (3-0-0-6) Origin
and occurrence, composition, classification and physico-chemical properties
of petroleum; testing and uses of petroleum products; refining Processes such
as distillation, cracking, reforming; conversion of petroleum gases into
motor fuel, aviation fuel; lubricating oils and petroleum waxes; chemicals
and clay treatment of petroleum products, desulfurization; refining
operations -Dehydration, Desalting, Gas separation, Natural gas production
and gas sweetening; tube still heater design; product profile of
petrochemicals; petrochemical feed stocks; olefin and aromatic hydrocarbons
production; Treatment and upgrading of olefinic C4 and C5 cuts; chemicals
from C1 compounds, ethylene and its derivatives, propylene and its
derivatives, butadiene and butene; BTX chemicals. Text/References: 1.
W.L. Nelson, Petroleum Refinery Engineering, McGraw
Hill, New York, 1961. 2. K.
H. Altgelt and M. M. Boduszynski, Composition
and analysis of heavy petroleum fractions, Dekker, 1994. 3.
J. H. Gary and G. E. Handwork, Petroleum
refining technology and economics, 4th Ed., Dekker, 2001. |
CL 428
Fuel
Engineering
( 3-0-0-6) Conventional
and non-conventional energy sources; solar energy; wind energy; energy from
biomass; energy survey in India. Solid fuels: origin and composition of coal;
analysis and properties of coal; coal classification; properties and storage
of coal; coal carbonization, gasification and liquefaction. Liquid fuels:
origin and composition of petroleum; petroleum processing; petroleum refining
in India. Combustion process: combustion stoichiometry and combustion
thermodynamics; gas burners; oil burners; coal burning equipment. Texts/References: 1.
S. Sarkar, Fuel & combustion,
2nd Ed., Orient Longman, 1990. 2.
J. G. Speight, Fuel Science
& Technology Handbook, Dekker, 1990. 3.
R. E. Haytes and S.T. Kocaczkowski, Introduction to catalytic combustion, Gordon & Beach, 1997 |
CL 429
Catalysis
(3-0-0-6) Principle
of catalytic reaction engineering; mechanism of contact catalysis; kinetics
of chemical reaction in homogeneous and heterogeneous catalysis; selecting
catalytic agents. Fluid catalytic cracking; Design and developing industrial
catalysts: preparation of catalysts; characterization of catalysts;
analytical instruments, monitors and controllers that are used to prepare and
characterize catalysts and to conduct detailed kinetic studies. Practical
examples of industrial catalysts: Zeolite catalyst applications:
Transformation and Synthesis of Zeolite using by experimental apparatus for
characterization, reactivity test; Heavy oil cracking, Development of Clay
Adsorbent for KeroMerox Refining Process, Dimethylamine synthesis using
mordenite catalyst. Texts/References: 1. J.
J. Carberry, Chemical and Catalytic
Reaction Engineering, Dover, 2001. 2. J.
Weitkamp, and L. Puppe (eds.), Catalysis
and Zeolites: Fundamentals and Applications, Springer Verlag,
1999. 3. S.
S. E. H. Elnashaie and S. S. Elshishini, Dynamic
Modelling, Bifurcation and Chaotic Behaviour of Gas-Solid Catalytic reactors,
Taylor and Francis, 1996. |