Education:

• Ph D (Structural Engineering), Indian Institute of Technology Guwahati
• M Tech (Structural Engineering), Indian Institute of Technology Guwahati
• BE (Civil Engineering), Jorhat Engineering College, Dibrugarh University

Professional Experience:

• Technical Officer, Civil Engineering, Indian Institute of Technology Guwahati
• Scientific Officer, Civil Engineering, Indian Institute of Technology Guwahati

Research Interest:

• Structural Design and Analysis
• Health Monitoring of Structures
• Civil Engineering Materials
• Finite Element Method
• Earthquake Engineering
• Heritage Structures
• Sustainable construction materials
• Sustainable Infrastructures

Honors/Awards/Medals:

• Awarded National Merit Scholarship During 10 + 2
• Awarded Merit Scholarship and Directorate of Technical Education (DTE) Scholarship During Bachelor of Engineering

Professional Membership

• Member-American Society of Civil Engineers

 

Publications:

Patents

1. Uday S Dixit, Arun C Borsaikia and Amit Raj, “Autoclaved Aerated Concrete (AAC) Block Comprising Inbuilt Anchorage/Frog on Surface for Enhancement of Bonding and Lateral/Shear Strength in Masonry Wall System”, 201831028883A, Controller General of Patents, The Patent Office Journal No. 36/2018, July 2018.
2. Arun C Borsaikia, “Universal Foot Operated Hand Sanitization System”, 202031020514, Controller General of Patents, Applied on 15.05.2020.

Book Chapter

1. Reddy, S. B., Krishna, A. M., Borsaikia A. C. (2017). “Feasibility Study of Retaining Walls Backfilled with Sand-Tire Chip Mixtures”, Chapter 25, Geoenvironmental Practices and Sustainability, Developments in Geotechnical Engineering, G.L Sivakumar Babu et al. (eds.), Springer Nature Singapore Pvt. Ltd. DOI 10.1007/978-981-10-4077-1_25.

2. Borsaikia A. C., Kumar Anup, Raj Amit and Dixit Uday S (2018), “Development of Epoxy Based Composites Using Bamboo and Waste Metal Chips”, Material Science and Materials Engineering, Elsevier, January 2018, DOI:10.106/B978-0-12-803581-8.11172-5.

3. Raj Amit, Borsaikia A. C. and Dixit U S (2019), “Manufacturing of Autoclaved Aerated Concrete (AAC): Present Status and Future Trends”, Advances in Simulation, Product Design and Development (pp.825-833), DOI: 10.1007/978-981-32-9487-5.

4. Raj, A, Borsaikia A. C., and Dixit, US, (2020) Finite Element Modeling of Autoclave Aerated Concrete (AAC) Masonry for Estimation of Strength. In Manufacturing Engineering (pp. 511-524). Springer, Singapore. DOI: 10.1007/978-981-15-4619-8_37.

5. Borsaikia A C (2019), “ Behaviour of Original Building Materials used in Construction of Old Heritage Structures During Medieval Chronicles in Assam, India”, Archaeological Heritage of South Asia(pp.140-151), Directorate of Archaeology, Assam, ISBN:10838|ISBN|2019|A.

Journals

1. Talukdar S and Borsaikia A C, “An assessment of the progressive failure of concrete using pulse velocity measurements”, Indian Concrete Journal (79), pp. 61-64, 2005.
2. Borsaikia A C, Talukdar S and Dutta A, “Study of modal parameters and vibration signatures of cracked concrete prisms”, Cement and Concrete Research (36), pp. 592-598, 2005.
3. Deb S K and Borsaikia A C, “Design of mass concrete mix for gravity dam based on fineness modulus and geometrical gradation”, Indian Concrete Journal, 2006.
4. Bindra S, Borsaikia A C and Jawed M, “Bessel’s graphical solution of three-point problem in plane-table Surveying- limitation and alternative solutions”, Journal of Surveying Engineering (JSE), Vol. 133, Number 4, ASCE, November 2007.
5. Borsaikia A C, Dutta A and Deb S K, “System identification of multistoreyed non-standard shear building using parametric state space modeling”, Structural Control and Health Monitoring, Vol. 18, Issue 4, pp. 471–480, June 2011.
6. Kamal S M, Borsaikia A C and Dixit U S, “Experimental assessment of residual stresses induced by the thermal autofrettage of thick-walled cylinders”, Journal of Strain Analysis, Vol. 51 (2), pp.144-160, February 2016.
7. Paul P and Borsaikia A C, “Evaluation of cement quantity in hardened concrete using chemical analysis procedure” Indian Concrete Journal, Vol. 90 (2), pp., 12-18, February 2016.
8. Borsaikia A C, Kumar Anup, Raj A and Dixit U S, "Development of epoxy based composites using bamboo and waste metal chips" under review in Journal of Cleaner Production.
9. Raj Amit, Borsaikia A C and Dixit Uday S, “Bond strength of Autoclaved Aerated Concrete (AAC) masonry using various joint materials”, Journal of Building Engineering, DOI: https://doi.org/10.1016/j.jobe.2019.101039.
10. Raj Amit, Borsaikia A C and Dixit Uday S, “Compressive and shear bond strengths of grooved AAC blocks and masonry”, Materials and Structures, DOI: https://doi.org/10.1617/s11527-019-1428-8.23456789.
11. Raj Amit, Borsaikia A C and Dixit Uday S, “Evaluation of Mechanical Properties of Autoclaved Aerated Concrete (AAC) Block and its Masonry”, Journal of The Institution of Engineers (India): Series A, (101), 315-325, Springer; DOI: https://doi.org/10.1007/s40030-020-00437-5.
12. Haloi J, Mushahary S K, Borsaikia A C and Singh K D, “Experimental investigation on the web crippling behaviour of pultruded GFRP wide-flange sections subjected to two-flange loading conditions”, Composite Structures 259 (2021) 113469 , 18 December, 20200263-8223/© 2020 Elsevier Ltd., DOI: https://doi.org/10.1016/j.compstruct.2020.113469.
13. Raj A, Borsaikia A C, Dixit US (2020) Physical and Mechanical properties of Autoclaved Aerated Concrete (AAC) Block used in the building wall system: A review, Manufacturing Technology Today, ISSN: 0972-7236, Vol. 19, No. 12, December 2020, pp. 9-18.
14. Haloi J, Borsaikia A C and Singh K D, “Web crippling behaviour of web perforated GFRP wide-flange sections subjected to interior-two-flange loading condition”, Thin Walled Structures 166 (2021) 108072 , 8 June, 20200263-8223/© 2020 Elsevier Ltd., DOI: https://doi.org/10.1016/j.tws.2021.108072.
15. Haloi J, Borsaikia A C and Singh K D, “Mechanical characterization of pultruded GFRP channel, wide flange and rectangular hollow profiles”, Innovative Infrastructure Solutions, 7(1), 1-18. https://doi.org/10.1007/s41062-021-00501-4.
16. Haloi J, Singh K D and Borsaikia A C, “Web crippling behaviour of web perforated GFRP wide-flange section profile under end-two-flange loading condition”, Thin Walled Structures 175 (2022) 109187 , 24th March, 2022 0263-8231/© 2022 Elsevier Ltd. DOI: https://doi.org/10.1016/j.tws.2022.109187.
17. Borsaikia A C and Dutta A and Deb S K, “Evaluation of participation of masonry infill walls in the linear and nonlinear behaviour of RC buildings with open ground storey” Journal of Building Engineering, 44 (2021), DOI: https://doi.org/10.1016/j.jobe.2021.103263.
18. Kar P, Borsaikia A C and Singh K D, “Experimental investigation of partially confined concrete-filled steel tubular square columns under lateral cyclic loading”, Journal of Constructional Steel Research 201(2023)107751, 21 December, 2021, Elsevier Ltd., DOI https://doi.org/10.1016/j.jcsr.2022.107751.

Conferences

1. Bindra S, Shah S, Borsaikia A C and Jawed M, “ Limitations of Bessel’s Graphical Solution to Three-Point Problem in Plane-Table Survey”, Proceedings of the International Seminar "GTS to GPS: Geodesy on the Move, 9th -12th Feb, 2003, Survey of India, Dehradun, 2003.
2. Borsaikia A C, Dutta A and Talukdar S, “Evaluation of modal characteristics of cracked concrete beams” Proceedings of the Structural Engineering Convention: 2003, Ed. S. K. Bhattacharya, pp 191-199, Dec 12-14, 2003, IIT Kharagpur, 2003.
3. Talukdar S, Srinivasulu D and Borsaikia A C, “Properties of medium strength concrete using Nagaon paper mill fly ash”, Proceedings of the International Congress on Flyash Utilization, organized TIFAC, Department of Science & Technology, GOI, pp. VI 38.1-38.12, 3-7 December, 2005.
4. R. Edala, S. Talukdar and A. Borsaikia, “Vibration based study of concrete beams in damaged and repaired states”, Proceedings of the International Conference on Applied, Computional and Experimental Mechanics, held at IIT Kharagpur, pp.627-629, Dec 27-29, 2007.
5. Borsaikia A C, Maity D and Mishra M, “Stone dust bricks as replacement of burnt clay building bricks in construction industry”,Proceedings of Sixth Structural Engineering Convention pp. 1089-1094,2008.
6. Borsaikia A C, Dutta A and Deb S K, “Identification of Influence of Infill Walls on Lateral Stiffness of R C Framed Structure”, Proceedings of 5th International Civil Engineering Conference (CECAR5) together with the Australasian Structural Engineering Conference (ASEC 2010), Sydney, 2010.
7. Truly Mittal, Borsaikia A C and Talukdar S, "Effect of Silica Fume on Some Properties of concrete", Proceedings of International Conference on Structural Engineering, Construction and Management, Kandy, Central, Srilanka, 16th to 18th December,2011.
8. Borsaikia A C, Dutta A and Deb S K, “Identification of System Parameters of Test Models with Infill Walls”, 21st International Conference on Structural Mechanics in Reactor Technology, New Delhi, 2011.
9. Kamal S M, Borsaikia A C and Dixit U S, “Measurement of Residual Stresses in the Thermal Autofrettage of Thick-walled Cylinder”, Proceedings of 30th National Convention of Production Engineers’ and National Seminar on “Sustainable Manufacturing, Agartala, July 18-19, 2015.
10. Reddy S. Bali, Krishna A. Murali and Borsaikia A C, “Feasibility Study of Sand–Tire Chips Mixtures as Backfill Material in Retaining Walls” Indo-US Bilateral Workshop Establishing Linkages Between Geo-environmental Practices and Sustainability, Chicago, 18th August, 2016.
11. Verma R S, Deb S K and Borsaikia A C, “Experimental Study on Seismic Performance of External RC Beam-Column Connections Made Using RCA”, 16th World Conference on Earthquake, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017.
12. Raj A, Barman S, Borsaikia A C and Dixit U S, "Stress-strain behavior of materials used in a building wall system made of AAC blocks", National Conference on Sustainable Mechanical Engineering: Today & Beyond, Tezpur, Assam, 24-25th March, 2017.
13. Borsaikia A C, "Behaviour of original building materials used in construction of old heritage structures during medieval chronicles in few spots of Assam, India', International Seminar on Archeological Heritage of South Asia, Guwahati, Assam, 19-21 November, 2017.
14. Amit Raj, A C Borsaikia and Uday S Dixit, “Manufacturing of Autoclaved Aerated Concrete (AAC): Present Status and Future Trends”, 7th International and 28th All India Manufacturing Technology, Design and Research Conference 2018 (AIMTDR 2018), 13-15th Dec., 2018.
15. Raj A, Borsaikia A C and Dixit Uday S, “Finite Element Modeling Of Autoclave Aerated Concrete (AAC) Masonry For Estimation Of Strength”, 6th International Conference on Production and Industrial Engineering Jalandhar, India, June 8-10, 2019.
16. Raj A, Borsaikia AC and Dixit US (2019) Physical and mechanical properties of Autoclaved Aerated Concrete (AAC) used in the building wall system: A review, 7th International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Indian Institute of Technology Ropar, India.

Invited Presentation

1. NPEEE sponsored short-term course on held at IIT Guwahati during Dec 5-9, 2005.
2. Workshop on Preparation of DPR for PMGSY schemes as per NRRDA guidelines, held at Assam Administrative Staff College, 30th September, 2008.
3. QIP Short Term Course on Advances in Concrete and Masonry: Materials and Mechanics, conducted at IIT Guwahati, 16-20th June, 2008.
4. Workshop on Modern Surveying Techniques for Assam State Govt. official, held at IITG, 7-11 Dec and 13-17th Dec, 2010.
5. Training Lecture during Skill Development Training for Mason under National Rural Livelihood Mission, held at SIRD campus Guwahati, 1st September, 2011.
6. QIP short term course on "Hydro-electric power development", held at IITG, 5-9th December, 2011.
7. Engineers Training on "Natural Resource Materials Used in Construction Purpose ", held at SSA Campus, October, 2011.
8. Workshop on Seismic Retrofitting of Buildings, held at NIT Silchar, 11-13th June, 2012.
9. Inaugural Technical Lecture during Skill Development Training for Masons under National Rural Livelihood Mission, held at SIRD campus Guwahati, 13th February, 2013.
10. Invited Lecture for Trainers of Skill Development Training for Masons under National Rural Livelihood Mission, held at SIRD campus Guwahati, 3rd March, 2013.
11. AICTE Staff Development Programme on Design of Steel Structure using IS: 800-2007, held at Assam Engineering Institute, 12th June, 2014.
12. Seminar on Earthquake and Its Effect on Structures, held at Assam Down Town University, 9th May, 2015.
13. Invited Talk on Proof Checking of Structural Design by Design Review Panel, organized by Assam Real Estate & Infrastructural Developer Association (AREIDA), 2nd October, 2015.
14. Invited Talk on Health Monitoring of Heritage Structures, organized by Assam Directorate of Archaeology for World Heritage Week 2016, 20th November, 2015.
15. Invited Talk during Training Course on “Planning and Management of Low Cost PMAY-G Rural Housing” for Rural Development Functioneries like ZP members, AP Presidents, Engineers etc. of North East India,organised by NIRD&PR, NER Centre, 23rd November, 2016.
16. FDP on Recent Advances in Concrete Technology, 15th-19th July, 2019, Assam Engineering College.
17. Training on Structural design of Piped Water Supply Scheme for Graduate Engineers of PHED, Assam, 25^th -30^th November.

 

 

 

Academics:

Teaching

1. Involved in Instruction of CE211 Building Drawing and Estimation Course in 1999
2. Involved in Engineering Survey laboratory Course for B Tech
3. Involved in Geotechnical Engineering laboratory Course for B Tech
4. Involved in Transportation Engineering laboratory Course for B Tech
5. Involved in Engineering Geology laboratory Course for B Tech
6. Involved in Building Materials laboratory Course for B Tech
7. Involved in Fluid Mechanics laboratory Course for B Tech
8. Involved in Experimental Methods laboratory Course for M Tech
9. Laboratory Manual Material Developed for B Tech (Civil Engineering Materials) and M Tech (Structural Engineering Laboratory)
10. Course Instructor (Design Project, CE 402 from 2015 onwards)
11. Tutor (Reinforced Concrete Design, CE 305 from 2015 onwards)

Course Organized

1. QIP Short Term Course on Advances in Concrete and Masonry: Materials and Mechanics, conducted at IIT Guwahati during 16-20th, June 2008.
2. Short term refresher training programme on Concrete Technology for middle level engineers of Public Health Engineering Departments of Assam State Govt., held at IITG, 11-13th Feb, 2015.
3. Short term training programme on “Sustainable & Good Construction Practices for Single Dwelling Units” in three weekends for practicing Civil Engineers and architects from Assam, held at IITG, 22nd -23rd, 29th Feb-1st March and 7th- 8th March 2020.
4. TEQIP-III Short term training programme on “Recent Advances in Construction Materials and Building Technologies” through online mode during 26th Dec, 2020, 28th Dec-31st Dec, 2020.

Experiences in academic administration

1. Member, various Purchase Committee of equipment for department as well as other departments from 1999 onwards.
2. Member, Institute Survey Works (Engineering Section) within Campus from 1999 onwards
3. Convener, Institute Survey Works within Campus from 2009 onwards
4. Benchmark installation of IITG Campus
5. Member of Horticulture Measurements Committee
6. Secretary of IITG Alumni Association Guwahati Chapter
7. Maintenance of Masterplan Map of the Campus from 1999 onwards

Laboratory Development Experience

1. Involved in Planning of Overall Laboratory Setup at Transit complex from 1999 onwards which include Material Testing (including NDT), Structural Vibration, Computational, Fluid Mechanics, Geotechnical Engineering, Engineering Survey, Transportation Engineering, Environmental Engineering
2. Involved in Procurement and Installation of Equipment at Transit complex from 1999 onwards for laboratories like Material Testing (including NDT), Structural Vibration, Computational, Fluid Mechanics, Geotechnical Engineering, Engineering Survey, Transportation Engineering, Environmental Engineering
3. Overall supervision of planning and execution of laboratories at Academic Complex in M & N blocks for Structural Engineering, Transportation Engineering, Water Resources & Engineering, Geotechnical Engineering, Environmental Engineering, Engineering Survey, Engineering Geology, Computational from 2003 onwards
4. Played key role in Execution of Three Cell Strong floor (20m x 9m), Strong wall (9m x 6m and 10m x 6m), planning, design, drawing and execution of Universal Loading Frame - 1000 kN, Finalization specifications of 200 kN capacity EOT crane, 28m long Hydraulic Hard Line for actuator system, Two Cooling Towers, 1000 kN UTM etc. for Structural Laboratory
5. Involved in Installation of Earthquake Simulator Testing Facility (Shake Table): 50 kN Payload, 2.5m x 2.5m
6. Involved in Procurement and installation of Dynamic Data Acquisition System along with Sensors, Loading Devices and Test Controller etc.
7. Played key role in Major equipment procured and installation are:
   1) MTS servo-hydraulic actuator for low performance dynamic testing (upto 2 Hz): Capacity- 1000 kN (Comp.), 650 kN (Ten.)
   MTS servo-hydraulic actuators for high performance dynamic / earthquake testing: two, Capacities: 250 kN and 100 kN
   MTS 4 stations and 4 channels servo controller for test control
   MTS 200 lpm capacity hydraulic power pack
   MTS 300 lpm hydraulic manifold with accumulator & 28 m long hydraulic hard line
   2) HBM dynamic data acquisition system: 16 / 32 Channels (procurement and upgradation)
   3) B&K Pulse Analyser, VTS Vibration Controller
   

 

Research & Development

1. “Design and Development of Proper Bonding Mechanism for Individual AAC Block Units in Wall System of a Structure” under TSDP of DST, New Delhi from June, 2016-May, 2019 as Co-PI (Prof. U S Dixit, ME- PI).
2. “Living Root Bridge Ecosystems and Indigenous Tribal Communities of Meghalaya” under National Geographic Society Expedition Council, Washington DC 20036 form March 2017 onwards as Co-PI (Prof. A K Sarma, CE- PI).
3. “Design and Development of an intelligent extrusion device for 3D printing of concrete structures” by DST, from March 2021 to February 2024 as Co-PI with Dr. Biranchi Panda and Prof. Uday S Dixit, Department of Mechanical Engineering.
4. “Development of a novel bio-composite thermal energy storage materials and its applications in isothermal drying of agricultural products and passive cooling of building” by ASTEC-Guwahati under S&T Institutional and Human Capacity Building of DST, GoI, New Delhi from July 2021 onwards as Co-PI (PI: Dr. Pankaj Kalita, School of Energy Science and Engineering).

Major consultancy projects

1. Investigation of Samples of Pre-stressed Concrete Porcupine and Concrete Blocks for Flood and River Erosion Management Agency of Assam (FREMAA), Sixmile, Guwahati-781 022, Kamrup, Assam.
2. Proof Checking of ROB at Bogibeel, North Lakhimpur, Katakhal, Katlichera etc. for PWD (NH-Roads), Assam.
3. Design of Mass concrete of concrete gravity dam using lower cement content for 2000 MW Lower Subansiri Hydro Power Project, NHPC, Gerukamukh, Lakhimpur, Assam.
4. Planning, Modeling and Design of Girls Hostel for Rashtriya Madhyamik Siksha Abhijan (RMSA), Kahilipara, Kamrup, Assam.
5. Planning, Modeling and Design of Model School for Sarba Siksha Abhijan (SSA), Kahilipara, Kamrup, Assam.
6. Development of Constituent Proportion for Stone Dust Mix Brick for Private Enterprise at Sibsagar, Assam.
7. Participated in Vibration Monitoring of Saraighat Double Deck Bridge for NF Railway, Maligaon, Kamrup, Assam.
8. Proof Checking of Design and drawings of New Nemcare Hospital at Jalukbari, Kamrup, Assam.
9. Evaluation of Structural Elements of Present Condition of GNRC Hospital Building at Dispur, Kamrup, Assam.
10. Evaluation of Structural Elements of Present Condition of GNRC Hospital Building at Barasat, West Bengal.
11. Proof Checking of Design and Drawings of Some Buildings at Agartala for NF Railway, Maligaon, Assam.
12. Nondestructive Evaluation of Employees State Insurance Corporation (ESIC), Campus Building at Bamunimaidan, Guwahati, Assam.
13. Nondestructive Evaluation of Software Technology Park of India (STPI) Building at Borjhar, Guwahati, Assam.
14. Investigation of Construction Materials and Related Work for the Construction of National Institute of Phamaceutical Education and Research Guwahati, Changsari, Guwahati, Assam.
15. Health Study of Compressor Foundation at Numaligarh Refinery Limited, Golaghat, Assam.
16. Proof checking of designs and drawings of buildings at IIT Patna Campus, Bihta, Bihar.
17. Structural Safety Audit of Main Hospital Building at NEIGRIHMS Campus, Shillong, Meghalaya.

Students

Doctor of Philosophy

Completed

1. Amit Raj (156103044), Topic: “Stress and Strain analysis of AAC Block”, Co-guiding with Prof. U S Dixit, ME.
2. Jyotirmoy Haloi (156104044), Topic: “Web Crippling Behaviour of Web Perforated Pultruded Fiber Reinforced Polymer (FRP) Rectangular Hollow and I-sections”, Co-guiding with Prof. K. Darunkumar Singh, CE.

Ongoing

1. Prasanta Kar (166104031), Topic: “Vibration Characteristics of Cracked Stainless Steel Square Tubular Member”, Co-guiding with Dr.K. Darunkumar Singh, CE.
2. Ujjwal Jyoti Dutta (176104106), “Ground behavior and structural interation of some of heritage structure of Ahom era in Assam”, Co-guiding with Prof. Chandan Mahanta, CE.

Master of Technology: Total: 10 nos.

2015 onwards

1. Soma Mallikarjuna (154103020), Topic: “Design and Development of Bonding Mechanism of AAC Blocks in Wall System of a Structure”, Co-guided with Prof. U S Dixit, ME.
2. Vipasha Maholia (164104093), “Stabilizing Arsenic containing Sludge with Cement and Fly Ash mix and evaluation of Leaching Characteristics”, Co-guided with Prof. Chandan Mahanta, CE.
3. Dip P. Bhatt (174104032), “Charaterization of FRP Section”, Co-guided with Prof. K. Darunkumar Singh, CE.
4. Amarjit Kumar (184104403), Topic: “Effect of corrosive environments on structural behavior of pultruded GFRP I-Section” with Prof. K. D. Singh.
5. Vivek Jha (184104421), Topic: “Development of Digital Image Correlation (DIC) Matlab Code for Full Field Displacement and Strain Measurement of Fibre Reinforced Polymer (FRP)” with Prof. K. D. Singh.
6. Swapnil Kumar Sahoo (184103334), “Energy Audit in Manufacturing of Autoclaved Aerated Concrete (AAC) Blocks” with Prof. U S Dixit.
7. M Bharath Kumar (194104410), “Numerical study on Lipped channel section columns fixed at both ends under axial Compression” with Prof. K. D. Singh.
8. Shubha Prasad Nayak (194104427), “Numerical Study On Angle Sections Of High Strength Steel Materials Failing Under Shear Lag Effect In Tension” with Prof. K. D. Singh

Bachelor of Technology: Total 30 nos.

2015 onwards

1. Ritesh Bidua (150104048), Topic: “Preliminary study on sustainability of bamboo wood in structural purposes”.
2. Sumit Bharti (150104065), Topic: “Self-Healing in concrete”.
3. Vishvajeet Kant (150104076), Topic: “Sustainable natural bridges”.
4. Nishant Kajla (150104034), Topic: “FRP as structural Material”.
5. Ashok Kumar (150104009), Topic: “FRP as structural Material”.
6. Arnav Bhaskar (160104011), Topic: “Impact of Aggressive Environmental Conditions on FRP Structures”.
7. M. Khogendrajit Singh (160104042), “Behaviour of Restrained Stainless Steel Beams at Elevated Temperature”.
8. Pranav Dhandekar (160104051), Topic: “Study on improvement of concrete characteristics using waste FRP product”.
9. Rakesh Kumar (160104060), Topic: “A Brief Study on Dynamic Behaviour of Fibre Reinforced Poymer (FRP) Pultruded Profile”.
10. Sankaracharjya Dutta Saikia (140104061), Topic: “Testing and Analysis of Fibre Reinforced Polymer Bolts as an Alternative to Steel Bolts”.
11. Satyaram Das (160104067), Topic: “Micro Fine Materials Used in Concrete”.
12. Vivek Kumar (160104078), Topic: “Use of Bamboo Fibers in concrete”.
13. Ghanishtha Gargav (170104032), Topic: “Study on Coffor Technology: Structural Stay-in-Place Formwork System”.
14. Shubham Rohilla (170104070), Topic: “Emerging Technologies in Building Construction – Plasmolite Walls”.
15. Bhoomit Tehlan (170104024), Topic: “Possible Joints in Roof Truss using Bamboowood Materials”
16. Mahendra Yadav (170104043) , “Topic: Bamboo Fibre and its use in Concrete”
17. Mehul Chaturvedi (170104047), Topic: “Behaviour of Framed Multi-Storey Building with and without RCC wall”.

 

Other Activities:

Academic/Administrative Responsibilities:

1. Member, various Purchase Committee of equipment for department as well as other departments from 1999 onwards
2. Member, Institute Survey Works (Engineering Section) within Campus from 1999 onwards
3. Convener, Institute Survey Works within Campus from 2009 onwards
4. Benchmark installation of IITG Campus
5. Member of Horticulture Measurements Committee
6. Secretary of IITG Alumni Association Guwahati Chapter
7. Maintenance of Masterplan Map of the Campus from 1999 onwards

Member of Expert Committees:

1. Member of Building Construction Monitoring Committee, National Institute of Pharmaceutical Education & Research (NIPER) Guwahati, Changsari, Assam.
2. Member of Technical Assessment Committee (TAC) of Building Materials and Technology Promotion Council (BMTPC), Ministry of Housing & Urban Poverty Alleviation, GOI, New Delhi.
3. Member of Building Committee of North East Zone, National Council of Science Museum(NCSM), Ministry of Culture, GOI, New Delhi.