Publications in International
Journals
1. D. Chakraborty
and B. Pradhan, "Critical Strain Energy Release
Rate of Broken Ply Composite Laminates” Journal Reinforced Plastics and
Composites, Vol.17, No.6, 1998, pp.498-511.
2. D. Chakraborty
and B. Pradhan, "Effect of Ply Thickness and
Fiber Orientation on Delamination Initiation in
Broken Ply Composite” Journal Reinforced Plastics and Composites, Vol.18,
No.8, 1999, pp.735-758.
3. D. Chakraborty
and B. Pradhan,"Influence of Interfacial Resin
Layer on Delamination Initiation in Broken Ply
Composite Laminates” Journal of Adhesion Sc. and Tech, Vol.14, No.12,
2000, pp.1499.
4. D. Chakraborty
and B. Pradhan, "Fracture Behaviour
of FRP Composite Laminates with an Embedded Elliptical Delamination
at the Interface” Journal Reinforced Plastics and Composites, Vol.19,
No.3, 2000, pp.1004-1023.
5. D. Chakraborty
and B. Pradhan, "Fracture Behaviour
of FRP Composite Laminates with Two Interacting Embedded Delaminations
at the Interface” Journal Reinforced Plastics and Composites, Vol.21,
No.8, 2002, pp.681-698.
6. S. Kumar, K. Srinivasan
and D. Chakraborty,
“Acoustic Emission Characterization of Metallic Specimen for crack
propagation” Materials and Design, Vo.24, 2003, pp.471-481.
7. S. Kumar, K. Srinivasan
and D. Chakraborty,
“Acoustic Characterization and Prediction of Surface Roughness”
Journal of Materials Processing Technology, Vol.57, 2004, pp.127-130.
8. B.
B. Mahanta, P. Reddy, A. Dutta
and D. Chakraborty
“Reliable Computation of Contact Force in FRP Composite Laminates under
Transverse Impact” Shock and Vibration, Vol.11, 2004, pp.129-142.
9. B.
B. Mahanta, D.
Chakraborty and A. Dutta
“Accurate Prediction of Delamination in FRP
Composite Laminates Resulting from Transverse Impact” Composite Science
and Technology, Vol.64, No.15, 2004, pp.2341-2351.
10. D.
Deka, G. Sandeep, D. Chakarborty
and A. Dutta “Multi-objective Optimization of
Laminated Composites using Finite Element Method and Genetic Algorithm, Journal
of Reinforced Plastics and Composites, Vol.23, No.3, 2005, pp.273-286.
11. D. Chakraborty
“Artificial Neural Network based Delamination Prediction
in Laminated Composites” Materials and Design, Vol.26. No.1,
2005, pp.1-7.
12. A.
Srivastava, A. Agarwal, D. Chakraborty
and A. Dutta, “Control of Smart Laminated FRP
Structures using Artificial Neural Network”, Journal of Reinforced
Plastics and Composites, Vol.24, No.13, 2005, pp.1353-1364.
13. D. Chakraborty
and M. Kumar, “Response of Laminated Composites under Multiple Impact
loading”, Journal of Reinforced Plastics and Composites, Vol.24, No.14,
2005, pp.1457 – 1477.
14. Rahul, D. Chakraborty and A. Dutta,
“Optimization of FRP laminated Composites using Island Model Parallel
genetic Algorithm”, Composite Science and Technology Vol.65, 2005,
pp.2003–2013.
15. S
K Pal and D Chakraborty,
“Surface roughness prediction in turning using artificial neural
network”, Neural Computing and Applications, Vol.14, pp.319–324,
2005.
16. H. Bisht,
J. Gupta, S. K. Pal and D. Chakraborty, “Artificial neural network based
prediction of flank wear in turning”, Int. J. Materials and Product
Technology, Vol.22, No.4, 2005, pp.328–338.
17. A.
K. Singh, S. S. Panda, S. K. Pal and D. Chakraborty, “Drill Wear Prediction using
Artificial Neural Network” International Journal of Advanced
Manufacturing Technology, Vol.28, No.5-6, 2006, pp. 456-462.
18. Rahul and G. Sandeep, D. Chakarborty and A. Dutta
“Multi-objective Optimization of Hybrid Laminates subjected to Transverse
Impact” Composite Structures, Vol.73, 2006, pp.360–369.
19. S.
S. Panda, A. K. Singh, D. Chakraborty and S. K. Pal, “Drill Wear Monitoring
using Back Propagation Neural Network” Journal of Materials Processing
Technology, Vol.172, 2006, pp.283–290.
20. T.
Roy and D. Chakraborty,
“Delamination in Hybrid FRP Laminates under Low
Velocity Impact” Journal of Reinforced Plastics and Composites, Vo.18,
No.6, 2006, pp.1939-1955.
21. D. Chakraborty,
“Delamination of laminated fiber reinforced
plastic composites under multiple cylindrical impact”, Materials and
Design, Vol.28, No.4, 2007, pp.1142-1153.
22. S. S. Panda, D. Chakraborty
and S. K. Pal, “Monitoring of drill flank wear using fuzzy back
propagation neural network”, International Journal of Advanced
Manufacturing Technology, Vol.34, No.3-4, 2007, pp.227-235.
23. S.
Garg, S. K. Pal, D.
Chakraborty, “Evaluation of the performance
of backpropagation and radial basis function neural
networks in predicting the drill flank wear”, Neural Computing and
Applications, Vol.16, No. 4-5, 2007.
24. T.
Roy and D. Chakraborty,
“Delamination in FRP laminates with holes under
transverse impact” Materials and Design, Vol.29, 2007, pp124-132.
25. S.
Kirtania and D.
Chakraborty, “Finite Element based
Characterization of Carbon Nanotubes, Journal of
Reinforced Plastics and Composites, Vo.26, No.15, 2007, pp.1557-1570.
26. S.
S. Panda, D. Chakraborty
and S. K. Pal, "Flank Wear Prediction in Drilling using Back Propagation
Neural Network and Radial Basis Function Network", Applied Soft Computing,
Vol.8, No.2, 2008, pp. 858-871.
27. S.
Garg, K. Patra, S. K. Pal, and D. Chakraborty, “Effect of
Different Basis Functions on a Radial Basis Function Network in Prediction of
Drill Flank Wear from Motor Current Signals”, Soft Computing - A Fusion
of Foundations, Methodologies and Applications, Springer Publications, Vo.12,
No.8, 2008, pp.777-787.
28. T.
Roy and, D. Chakraborty
“GA-LQR based Optimal Vibration Control of Smart FRP Composite Structures
with bonded PZT patches” Journal of Reinforced Plastics and Composites,
Vol.28, No.11, 2009, pp.1383-1404.
29. M.
Sivasankar, T. Benarjee, N. Ravikiran, D.
Chakraborty and S. K. Dwivedy,
“Dynamic stress and Fatigue analysis of artificial hip prosthesis”,
Accepted for publication, Indian Journal of Biomechanics, Vo.1, 2007, pp.53-58.
30. S
S, Panda, D. Chakraborty and S. K. Pal, “Drill Wear Prediction
using Different Neural Network Architecture” International Journal of
Knowledge-Based and Intelligent Engineering Systems, Volume 12, No.5-6, 2008,
pp.327-338.
31. T.
Roy and D. Chakraborty,
“Optimal Vibration Control of Smart Fiber Reinforced Composite Shell
Structures using Improved Genetic Algorithm” Journal of Sound and
Vibration, Vol.319, No.1-3, 2009, pp.15-40.
32. A
Kumar and D. Chakraborty,
“Effective properties of Thermo-Electro-Mechanically Coupled Piezoelectric
Fiber Reinforced Composites”, Materials and Design, Vol.30, 2009, pp.
1216-1222.
33. T.
Roy and D. Chakraborty,
“Genetic Algorithm based Optimal Design for Vibration Control of
Composite Shell Structures using Piezoelectric Sensors and Actuators”
International Journal of Mechanics of Materials and Design, Vol.5, No.1, 2009,
pp. 45-60.
34. T.
Roy and D. Chakraborty,
“Genetic algorithm based optimal control of smart composite shell
structures under mechanical loading and thermal gradient”, Smart
Materials and Structures, Vol.18, 2009, 115006.
35. T.
Roy, P. Manikandan and D. Chakraborty, “Improved shell
finite element for piezothermoelastic analysis of
smart fiber reinforced composite structures” Finite Elements in Analysis
and Design, Vol.46,
2010, pp.710-720.
36. H. Sarangi,
K.S.R.K. Murthy and D. Chakraborty, “Radial locations of strain gages
for accurate measurement of mode I stress intensity factor” Materials and
Design, Vol.31, 2010, pp.2840-2850.
37. S
Garg, K. Patra, V. Khetrapal, S. K. Pal and D. Chakraborty, “Genetically
evolved radial basis function network based prediction of drill flank
wear”, Engineering Applications of Artificial Intelligence, Vol. 23,
2010, pp.1112-1120.
38. H.
Sarangi, K.S.R.K. Murthy and D. Chakraborty, “Optimum strain
gage location for evaluating stress intensity factors in single and double
ended cracked configurations”, Engineering Fracture Mechanics, Vol.77,
2010, pp.3190-3203.
39. S. Kirtania
and D. Chakraborty,
“Multi-scale modeling of carbon nanotube
reinforced composites with a fiber break”, Materials and Design, Vo.35,
2012, pp.498-504.
40. H.
Sarangi, K.S.R.K. Murthy and D. Chakraborty, “Extent of three
Parameter Zone and Optimum Strain Gage Location for Eccentric Cracked
Configurations” Applied Mechanics and Materials Vols.110-116, 2012, pp.127-134.
41. D. Chakraborty,
P. K. Rathore, and T. Roy, “Optimal Actuators
Locations in Smart Fibre Reinforced Polymer
Structures Using Genetic Algorithm”, Applied Mechanics and Materials,
Vol.110-116, 2012, pp.1278-1283.
42. H.
Sarangi, K.S.R.K. Murthy and D. Chakraborty, “Optimum strain
gage locations for accurate determination of the mixed mode stress intensity
factors” Engineering Fracture Mechanics, Vol.88, 2012, pp.63-78.
43. M.
Sivasankar, K. Siva Sankar
Reddy, T. Benarjee, S. K. Dwivedy,
D. Chakraborty,
“Wear Analysis of Acetabular Cup for Daily
Activities” Indian Journal of Biomechanics 2012, Vol.3, No.1-2, 2012, pp.13-19.
44. H.
Sarangi, K.S.R.K. Murthy and D. Chakraborty, “Experimental
verification of optimal strain gage locations for the accurate determination of
mode I stress intensity factors” Engineering Fracture Mechanics, Vol.110,
2013, pp.189-200.
45. S.
Kirtania and D.
Chakraborty, “Fracture behavior of carbon nanotube-based composites with a broken fiber using
multi-scale finite element modeling”, Journal of Computational and
Theoretical Nanoscience Vol.11, No.3, 2014,
pp.676-684.
46. S. Kirtania
and D. Chakraborty,
“Analysis of Carbon Nanotube-Reinforced Alumina
Nanocomposites with a Broken Fiber” Journal of
Reinforced Plastics and Composites, Vol.33, No.4, 2014, pp.389-398.
47. Singh
A. Singh, Panda, S. Panda and D. Chakraborty, "Piezo-viscoelastically
damped nonlinear frequency response of functionally graded plates with a heated
plate-surface" Journal of Vibration and Control, doi:
10.1177/1077546314532672 May 14, 2014
48. Singh
A. Singh, Panda, S. Panda and D. Chakraborty, "Harmonically exited nonlinear
vibration of heated functionally graded plates integrated with piezoelectric
composite actuator" Journal of Intelligent Material Systems and
Structures, doi: 10.1177/1045389X14536005 May 27, 2014
49. D.
Chakraborty, K.S.R.K. Murthy and D. Chakraborty, “A new single
strain gage technique for the accurate determination of mode I stress intensity
factor in orthotropic composite materials” Engineering Fracture
Mechanics, Volumes 124–125, July 2014, Pages 142–15
50. Singh
A, Panda, S and Chakraborty, D, “Design and analysis of a
smart graded fiber-reinforced composite laminated plate” Composite
Structures Volume 124, June 2015, Pages 176–195
51. Singh
A, Panda, S and Chakraborty, D, “A design of laminated
composite plates using graded orthotropic fiber-reinforced composite
plies” Composites Part B: Engineering, Volume 79, 15 September 2015,
Pages 476–493
52. S.
Kirtania and D.
Chakraborty, “Failure analysis of carbon nanotube/epoxy composites having a broken carbon nanotube” Journal of Reinforced Plastics and
Composites, Journal of Reinforced Plastics and Composites, DOI:
10.1177/0731684415595127
Publications in Conferences
1.
D. Chakraborty and B. Pradhan,
"Delamination Initiation at the Interface of
Broken and Continuous Plies in FRP Composite Laminates" Proc. of COMPEAT,
NML, Jamshedpur, 19-20 March, 1998, pp. 206-213.
2.
D. Chakraborty and B. Pradhan,
"Fracture Behaviour of GL/E Laminates with
Broken Plies", Proc. of ISTAM, PSG Tech., Coimbatore, 16-19 Dec.,1998,
pp.39-44 .
3.
D. Chakraborty, N. Sivareddy and K. Srikanth, “A Versatile 3D Mesh Generator for
FEA”, Presented in 2nd ICTACEM, 27-31 December, 2001.
4.
D. Chakraborty, “Delamination
detection in FRP composite laminates using ANN”, Proceedings of the
IASTED, International Conference on Modelling,
Simulation and Optimatization, Alberta, Canada, 2003,
pp. 7-12.
5.
M. Khandelwal, D. Chakraborty, and
U.S. Dixit, “Delamination Initiation of FRP
Composites subjected to Low-Velocity Impact” 5th Int. Conf. on Mechanical
Engineering (ICME-2003), December 26-28, 2003, BUET, Dhaka, Bangladesh.
6.
M. Sivasankara, D. Chakraborty and
S. K. Dwivedy, “Finite Element Analysis of
Composite Hip Prosthesis, National Conference on Bio-Mechanics, IIT Delhi,
November 19-21, 2004.
7.
S.
Singh, D. Chakraborty and K. Srinivasan,
“Crack Prediction Simulation using Acoustic Emission and Artificial Neural
Network”
Paper No. EV02, Presented in 3rd Indo-German Theme Meeting on
“Advances in Structural Integrity and Safety” Jointly Organized by:
Health Safety Environment Group (BARC) and NPCIL Sponsored by: BRNS Date: 15-17
November, 2005.
8.
D. Chakraborty, Rahul and A. Dutta, “Multi-objective Optimization of Hybrid
Laminates using Genetic Algorithm.” Indo-Japan joint seminars on Advanced
Manufacturing, February 21-26, 2005 at IIT Kanpur
9.
G. Saket, S. K. Dwivedy and D. Chakraborty, “Design and fabrication of Computer
Controlled 4-wheel Mobile Platform, Proc of NaCoMM,
2003, IIT Delhi.
10.
S. Garg, D. Chakraborty, S. Deb, S.
K. Pal, “A neuro memetic-model
for prediction of drill wear”, International Conference on Advances in
Manufacturing and Technology Management, Mumbai, Jan 18-20, 2007.
11.
S. Garg, D. Chakraborty and S. K.
Pal, “Effect of basis width on the performance of radial basis function
network in prediction of drill wear”, National Conference on Recent
Trends in Information System and Management, SATI, Vidisha,
MP, Nov, 24-25, 2006.
12.
M. Sivasankar, S. K. Dwivedy, D. Chakraborty, “Fatigue Analysis of Artificial Hip
Joints for Different Activities”, 2nd Int. Congress on Computational
Mechanics and Simulation (ICCMS-2006), December 8-10, 2006, IIT Guwahati, India.
13.
S. Kirtania and D. Chakraborty.
“Finite element based determination of Young’s modulus and axial
coefficient of thermal expansion of single-walled carbon nanotubes
(SWCNTs).” in the 2nd Int. Congress on Computational Mechanics and
Simulation (ICCMS-2006), December 8-10, 2006, IIT Guwahati,
India.
14.
T. Roy, Md. M. Pasha and D. Chakraborty, “3D Layered Finite Element for Modeling
and Control of Smart Structure” 2nd Int. Congress on Computational
Mechanics and Simulation (ICCMS-2006), December 8-10, 2006, IIT Guwahati, India.
15. S.
K. Singh, K. Srinivasan
and D. Chakraborty, “Simulation of Crack
Prediction using Acoustic Emission and Artificial Neural Network” 2nd Int.
Congress on Computational Mechanics and Simulation (ICCMS-2006), December 8-10,
2006, IIT Guwahati, India.
16. D.
Chakraborty and M. Kumar, “Delamination
in Graphite/Epoxy Laminates Under Multiple Impacts”, Conference on Damage
in Composite Materials (CDCM06), University of Stutgard,
Germany, 18-19 Sept., 2006.
17. Rahul, D. Chakraborty and A. Dutta, “Optimization of FRP Laminated Composite
Structures using Parallel Genetic Algorithm”, Proc of 57th Congress of
ISTAM 2007, 14-17 Dec, 2007, BNMIT, Bangalore.
18. T.
Roy and D. Chakraborty, “Optimal Vibration
Control of Smart FRP Composite Structures using GA and LQR”, Proc of 57th
Congress of ISTAM 2007, 14-17 Dec, 2007, BNMIT, Bangalore.
19. V. K. Ahirwar,
A. Dutta and D. Chakraborty,
“Retrofitting of beam-column joint using FRP composites, Proc of 57th
Congress of ISTAM 2007, 14-17 Dec, 2007, BNMIT, Bangalore.
20. T.
Roy and D. Chakraborty, “LQG based Vibration
Control of Curved Smart FRP Composite Structure”, Proc of 4th
International Conference on Theoretical, Applied, Computational and
Experimental Mechanicc (ICTACEM 2007), 27-29 Dec,
2007, IIT Kharagpur.
21. Rahul, D. Chakraborty and A. Dutta, “Optimization Of FRP Laminated Composites
Using FEM And Parallel Genetic Algorithm” 7th Int. Conf. on Mechanical
Engineering (ICME-2007), December 28-30, 2007, BUET, Dhaka, Bangladesh.
22. S. Kirtania
and D. Chakraborty. “Evaluation of thermoelastic properties of carbon nanotube-based
composites using finite element method.” in the 8th Int. Conf. on
Mechanical Engineering (ICME-2009), December 26-28, 2009, BUET, Dhaka,
Bangladesh.
23. D.
Chakraborty and T. Roy, “Vibration Control of
Smart Composite Shell Structures using Genetic Algorithm” in the 8th Int.
Conf. on Mechanical Engineering (ICME-2009), December 26-28, 2009, BUET, Dhaka,
Bangladesh.
24. H. Sarangi,
K.S.R.K. Murthy, G. Venkatesh and D. Chakraborty, “Strain gage locations for accurate
measurement of the opening mode stress intensity factors”, Proc. of the
International Conference on Emerging Research and Advances in Mechanical
Engineering, (ERA-2009), DE-12, 454-459, VEC, Chennai.
25. S. Kirtania
and D. Chakraborty. “Finite element based determination
of effective Young’s modulus and coefficient of thermal expansion of
carbon nanotube-based composites.” in the
National Conf. on Computer Aided Modeling and Simulation in Computational
Mechanics (CAMSCM-2009), March 13-14, 2009, NERIST, Arunachal Pradesh, India.
26. H. Sarangi,
K.S.R.K. Murthy and D. Chakraborty, “Optimum
strain gage location for the accurate determination of stress intensity
factor”, National Conference on Emerging Trends in Mechanical
Engineering, (ETME-2010), DE-03, GCET, Gujarat.
27. H.
Sarangi, K.S.R.K. Murthy and D. Chakraborty,
“Upper bound for radial location of a strain gage for determination of
SIF in double edge cracked configurations” Proc of Fifth International
Conference on Theoretical, Applied, Computational and Experimental Mechanics
(ICTACEM-2010), , 587-589, IIT Kharagpur.
28. H.
Sarangi, K.S.R.K. Murthy and D. Chakraborty,
“Location of strain gage on eccentric cracked plates for accurate
determination of stress intensity factor”, Proc. of the 4th International
Conference on Advances in Mechanical Engineering (ICAME-2010), DD-12, 55-59,
SVNIT Surat, Gujarat.
29. T.
Roy and D. Chakraborty, “Optimal placements of
sensors/actuators in smart composite shell structures using genetic
algorithm” 7th International Conference On Vibration Engineering And
Technology Of Machinery (VETOMAC-2011), 21-24 Nov, 2011, Sanghai,
China.
30. D.
Chakraborty, M. Ranjan and
A. Kumar, “Dynamic analysis of functionally graded shell structure using
finite element method”, 9th Int. Conf. on Mechanical Engineering
(ICME-2011), December 18-20, 2011, Dhaka, Bangladesh.
31. S. Kirtania
and D. Chakraborty. “Stress transfer characterizations
at fiber break in carbon nanotube-reinforced
composites.” in the 2nd Int. Conf. on Advanced Nanomaterials
and Nanotechnology (ICANN-2011), December 8-10, 2011, IIT Guwahati,
India.
32. H.
Sarangi, K.S.R.K. Murthy and D. Chakraborty,
“Optimum radial locations of strain gage for accurate determination of
mode I stress intensity factor in edge cracked plate” Proc of XVII
National Seminar on Aerospace Structures (XVII NASAS-2011), 169-171, IIT
Kanpur.
33. M. Ranjan and D. Chakraborty, “Finite element analysis of functionally
graded shell structures”, Proc of 3rd Asian Conference on Mechanics of
Functional Materials and Strcutures (ACMFMS 2012), 5
– 8 Dec, 2012, IIT Delhi.
34. K.S.R.K.
Murthy, H. Sarangi and D. Chakraborty,
“Strain gage locations for experimental determination of the stress
intensity factors”, Proc of 3rd Asian Conference on Mechanics of
Functional Materials and Strcutures (ACMFMS 2012), 5
– 8 Dec, 2012, IIT Delhi.
35. S. Kirtania
and D. Chakraborty. “Multi-scale analysis of carbon nanotube (CNT)-reinforced metal matrix composites with a
broken fiber.” in the 4th Int. Conf. on Recent Advanced in Composites
Materials (ICRACM-2013), February 18-20, 2013, Goa, India.
36. K.S.R.K.
Murthy, H. Sarangi and D. Chakraborty,
“Experimental verification of optimal strain gage locations for the
accurate determination of location for the accurate stress intensity
factors”, Proc of 13th International Conference on Fracture, June 16-21,2013, (ICF-2013), S51-003, Beijing China.
37. K.S.R.K.
Murthy, H. Sarangi and D. Chakraborty,
“Strain gage radial locations for the accurate determination of mode I
stress intensity factors”, Proc of 13th International Conference on
Fracture, June 16-21,2013, (ICF-2013), S51-003,
Beijing China.
38. D
Chakrabortry and Pawan
Kumar Rathore, “Optimal locations of
collocated/non-collocated sensors/actuators in smart composite shell
structures”, Paper No. VCX2014_1061: VETOMAC X, 9-11 September, 2014,
University of Manchester, UK.