Anjan kumar S Assistant Professor, Department of Civil Engineering,
Indian Institute of Technology Guwahati (IITG), Guwahati-781039, Assam Tel: 91-361-258 3332 (O), Fax: +91-361-258 2440, Email:
sak@iitg.ernet.in
Education:
Ph.D (2012), Indian Institute of Technology Madras, India.
M.E (2006), University Visvesvaraya College of Engineering, Bangalore University, India.
B.E (2004), Bangalore Institute of Technology, Visvesvaraya Technological University, India.
Professional Experience:
Advisory Consultant (2014-2015), Larsen & Toubro (L&T), Infrastructure Development
Projects Limited, India.
Post-Doctoral Research Fellow (2012-2014), Centre for Transportation Infrastructure
Systems (CTIS), The University of Texas at El Paso, USA.
Senior Design Engineer-Research (2011-2012), Larsen & Toubro (L&T), Infrastructure
Development Projects Limited, India.
Project Associate (2006- 2007), Indian Institute of Technology Madras, India.
Specialization:Transportation Engineering
Primary Research Interests:
Analysis and Design of
Pavement Structures.
Pavement Material Characterization.
Pavement Construction and Recycling.
Pavement Management Systems.
Pavement Evaluation using NDT
Forensic Investigations of Pavement Failures
Honors/Awards/Medals:
Post-Doctoral Fellowship,
Centre for Transportation Infrastructure Systems, The University of
Texas at El Paso, 2012-2014.
Graduate Research Fellowship,
Indo-US Science and Technology Forum, 2009.
Special Paper Award, National symposium, Recent Advances in Civil
Engineering, India, 2009.
Best Paper Award, Ninth National Conference on Technical Trends, India,
2008.
Danniel D. R., Imad, N. A., Brett, H., Anjan kumar, S., and
Soheil, N. (2015). “Methodology for determining performance life of
various hot-mix asphalt mixtures in Texas.” 94th Annual Meeting,
Transportation Research Board (TRB), Washington DC.
Anjan
kumar, S., Sarvanan, U., Murali Krishnan, J., and Veeraragavan, A.
(2014).“Rheological characterization of modified binders at mixing
and compaction temperature.” International Journal of Pavement
Engineering, Vol 15 (9), 767-785.
Anjan kumar, S., and Veeraragavan, A. (2012). “Rheological and rutting
characterization of asphalt mixes with modified binders.”Journal of Testing
& Evaluation, ASTM, Vol. 40(1), 1-12.
Anjan kumar, S., and Veeraragavan, A. (2011). “Dynamic mechanical
characterization of asphalt concrete mixes with modified asphalt
binders.”Material Science and Engineering, Vol. 528 (21), 6445-6454.
Anjan kumar, S., Alagappan, P., Murali Krishnan, J., and
Veeraragavan, A. (2011). “Mechanical response of modified asphalt
pavements.” First T&DI Congress, Integrated Transportation &
Development for a Better Tomorrow, ASCE.
Anjan kumar, S., and Veeraragavan, A. (2010). “Performance based binder type selection using
mixed integer programming technique.”Construction and Building Materials, Vol. 24 (11),
2091-2100.
Anjan kumar, S., Tahseen. H., Mallick. R. B., and Veeraragavan, A. (2010). “Life cycle cost
analysis of flexible pavements with modified asphalt mixes Indian experience.”11thInternational
Conference on Asphalt Pavements, ISAP, Nagoya, Japan.
Anjan kumar, S., Amarnath, M. S., and Veeraragavan, A. (2008). “Effect of air voids on fatigue
performance of asphalt mixtures." Proceedings, The Sixth International Conference on Road and
Airfield Pavement Technology(ICPT), Sapporo, Japan, 403-410.
Anjan kumar, S., Murali Krishnan, J., and Veeraragavan, A. (2008). “Steady shear properties of
a class of aged bitumens." 4
th International Gulf Conference on Roads (IGCR), Doha, Qatar, No.
041, 441-451.
Anjan kumar, S., Mishra,S. K., and Veeraragavan, A. (2008). “Improved performance of
bituminous concrete mixes with polymer modified binder for Indian highways.”International
Conference on Transportation Planning and Implementation Methodologies for Developing
Countries, (TPMDC), IIT Bombay, India.
National Journal/Conference
Kanishak, C., Anjan kumar, S., Rajib B. Mallick., and Veeraragavan,
A. (2012).“Investigations on laboratory performance of bituminous mixes
with reclaimed asphalt pavement materials- A step towards sustainable
road infrastructure in India.”Journal of Indian Road Congress (IRC),
Vol. 72 (3), 339-352.
Anjan kumar, S. (2009). “Viscous
characteristics of modified binders during mixing and compaction."
Student Symposium on Research in Civil Engineering, Indian Institute of
Technology Madras, India.
Anjan kumar, S., and Veeraragavan, A. (2009). “Effect of bitumen content
on fatigue life of SBS polymer modified bituminous concrete mix.”National
symposium on Recent Advances in Civil Engineering (RACE), J. N. T. U.
College of Engineering, India.
Anjan kumar, S., and Veeraragavan, A. (2008). “Needed characterisation of
modified binders in India.” Proceedings, New Building Materials and Construction
World, India, Volume 14, Issue- 3, 242-255.
Anjan kumar, S., Amarnath,
M. S., and Veeraragavan, A. (2008). “Studies on relative performance of
bituminous concrete mixes with different gradations." Ninth National
Conference on Technical Trends (NCET), CET, Kerala, India.