Journals (Published/Accepted)
2022
(30) Pandian, A. K., Gautam, S. S., and Senthilvelan S., Effect of layer orientation on the single tooth bending fatigue strength of selective laser sintered polymer gear, IMechE Part L: Journal of Materials: Design and Applications, 2022, (DOI: 10.1177/14644207221074902)
(29) Sharma, G. N., Sundararajan T., and Gautam, S. S., Identification of limiting damping mechanisms in a high quality factor hybrid resonator of space application gyroscope, Advances in Space Research, 2022, 69(3), pp. 1662-1679 (DOI: 10.1016/j.asr.2021.11.031)
2021
(28) Ozarde, A. P., McNay, G. H., and Gautam, S. S., Comparative fretting fatigue life evaluation between critical plane based and deviotoric strain amplitude based methods corrected for surface wear damage, 2021, (accepted in SAE International Journal of Materials and Manufacturing)
(27) Gouravaraju, S., Narayan, J., Sauer, R. A., and Gautam, S. S., A Bayesian regularization-backpropagation neural network model for peeling computations, 2021, (accepted in Journal of Adhesion, DOI: 10.1080/00218464.2021.2001335)
(26) Pandian, A. K., Gautam, S. S., and Senthilvelan S., Comparison of the bending fatigue performances of selective laser sintered and injection molded nylon spur gears, 2021, (accepted in IMechE Part L: Journal of Materials: Design and Applications, DOI: 10.1177/14644207211047376)
(25) Gireesh, S. N., Sundararajan, T., and Gautam, S. S., Design to operational parameters dependency on quality factor of sensor mechanical resonators, Journal of Gyroscopy and Navigation, 2021, 12(2), 119-137 (DOI: 10.1134/S207510872102005X).
(24) Gireesh, S. N., Sundararajan, T., and Gautam, S. S., Thermoelastic damping based design, sensitivity study, and demonstration of a functional hybrid gyroscope resonator for high quality factor, Journal of Gyroscopy and Navigation, 2021, 12(1), 69-85 (DOI: 10.1134/S2075108721010107).
(23) Pandian, K., Gautam S. S., and Senthilvelan, S., Effect of metal and polymer mating gears on the bending fatigue performance of asymmetric polymer gears, Proceedings of iMeche Part L: Journal of Materials: Design and Applications, 2021, 235(10), pp. 2324-2339 (DOI: 10.1177/14644207211003321).
(22) Gouravaraju S., Sauer, R. A. and Gautam S. S., On the presence of a critical detachment angle in gecko spatula peeling - a numerical investigation using an adhesive friction model, The Journal of Adhesion, 2021, 97(13), 1234-1254 (DOI: 10.1080/00218464.2020.1746652).
(21) Gouravaraju S., Sauer, R. A. and Gautam S. S., Investigating the normal and tangential peeling behaviour of gecko spatulae using a coupled adhesion-friction model, The Journal of Adhesion , 2021, 97(10), 952-983 (DOI: 10.1080/00218464.2020.1719838).
(20) Ozarde, A., Narayan, J., Yadav, D., McNay, G. and Gautam, S. S., Optimization of Diesel Engine's Liner Geometry to Reduce Head Gasket's Fretting Damage, SAE International Journal of Engines, 2021, 14(1), pp. 81-97. (DOI: 10.4271/03-14-01-0006)
(19) Ozarde, A., McNay, G., and Gautam, S. S., Fretting fatigue failure in internal combustion engine components - a review and future scope, SAE International Journal of Engines, 2021, 14(2), pp. 211-234 (DOI: 10.4271/03-14-02-0013)
(18) Agrawal V. and Gautam S. S., NURBS based isogeometric analysis for stable and accurate peeling computations, Sadhana, 2021, 46, Article number 3. (DOI: 10.1007/s12046-020-01513-z)
2020
(17) Sharma G. N., Sundararajan T., and Gautam S. S., Effect of geometric imperfections on anchor loss and characterisation of a coriolis vibratory gyroscope resonator with high quality factor, Journal of Gyroscopy and Navigation, 2020, 11(3), 206-213. (DOI: 10.1134/S2075108720030074)
(16) Pandian, K., Gautam S. S., and Senthilvelan, S., Experimental and numerical investigation of the bending fatigue performance of symmetric and asymmetric polymer gears, Proceedings of iMeche Part L: Journal of Materials: Design and Applications, 2020, 234(6), pp. 819-834 (DOI: 10.1177/1464420720909486)
(15) Pandian A. K., Gautam S. S., Senthilvelan S., Numerical Prediction of the Bending Fatigue Crack Propagation Behaviour in Asymmetric Spur Gears, International Journal of Vehicle Structures & Systems, 2020, 12 (5), pp. 507-512 (DOI: 10.4273/ijvss.12.5.04).
(14) Agrawal V. and Gautam S. S., Varying-order NURBS discretization: An accurate and efficient method for isogeometric analysis of large deformation contact problems, Computer Methods in Applied Mechanics and Engineering, 2020, 367, Article number 113125. (DOI: 10.1016/j.cma.2020.113125)
(13) Kiran U., Gautam S. S., and Sharma, D., GPU-based matrix-free finite element solver exploiting symmetry of elemental matrices, Computing, 2020, 102, pp. 1941-1965. (DOI: 10.1007/s00607-020-00827-4)
2019
(12) Kumar M., Gautam S. S., and Dixit P. M., Non-linear ductile damage growth law at elevated temperature, Sadhana, 2019, 44, pp. 145 (1-17). (DOI: 10.1007/s12046-019-1119-8)
2014
2013
2012
2011
2010