Contact Information:
Office: C-307,
Department of Mechanical Engineering,
IIT Guwahati, Guwahati, 781039,
India
Phone No.: +91-3612583441
email: arupn@iitg.ac.in
Completed Students
1.
Dr. Sagar Pawar
CEO, JRL Engineering Infratech Private Limited
CEO, EML Healthcare Pvt. Ltd.
Thesis Title: Electromagnetic Forming and Perforation of Al Tubes
Year: 2016-2021
Co-supervisor: Prof. Sachin D. Kore (IIT Goa)
Important Publications:
- Pawar, S., Kore, S.D. and Nandy, A., (2020). Comparison of Sheared Edge Zones Developed in Electromagnetic and Quasistatic Dieless Perforation. Journal of Materials Engineering and Performance, 29(2), pp.1146-1155. DOI: 10.1007/s11665-020-04636-w
- Pawar, S., Ray, D., Kore, S.D. and Nandy, A., (2021). Electromagnetic Forming and Perforation of Tubes: Modeling, Simulation and Validation. Journal of Manufacturing Science and Engineering, pp.1-36. DOI: 10.1115/1.4049090
PhD Students
Journals: 8
Conferences: 7
Book Chapters: 3
Conference Proceedings: 1
2.
Dr. Deepak Kumar
Postdoctoral Researcher, Incheon National Uni., South Korea
Thesis Title: Numerical and Experimental Investigations for Electromagnetic Crimping and Welding of Multi-material Tubular Components.
Year: 2017-2023
Journals: 7
Conferences: 7
Book Chapters: 2
Conference Proceedings: 3
Important Publications:
- Kumar, D.,Kore, S.D. and Nandy, A., (2021), Experimental investigation of Cu-SS electromagnetically assisted adhesive tube-to-tube joining: Its advantages over electromagnetic crimping, International Journal of Adhesion and Adhesives, 109: 102908. DOI: https://doi.org/10.1016/j.ijadhadh.2021.102908
- Kumar, D.,Kore, S.D. and Nandy, A., (2022), A study on the effect of process parameters on the joint strength and leak tightness in electromagnetically assisted adhesive Cu-SS tube-to-tube joining through statistical analysis,International Journal of Adhesion and Adhesives, 116: 103136.DOI: https://doi.org/10.1016/j.ijadhadh.2022.103136
- Kumar, D.,Kore, S.D. and Nandy, A., (2024). Electromagnetic Joining of Multimaterial Tubular Components: A Comprehensive Review, International Journal of Precision Engineering and Manufacturing - Green Technology. doi: 10.1007/s40684-024-00599-8
- Kumar, D., Kore, S.D. and Nandy, A., (2021). Finite Element Modeling of Electromagnetic Crimping of Cu-SS Tube-to-Tube Joint Along With Simulation of Destructive Testing for Strength Prediction of the Joint. Journal of Manufacturing Science and Engineering, 143(4). DOI:10.1115/1.4048431
3.
Dhiraj Bombarde
Thesis Title: Mixed Formulations to Alleviate Locking in Finite Element Analysis and Isogeometric
Analysis.
Year: 2017-2024 (Thesis Submitted)
Co-supervisor: Prof. S. S. Gautam
Journals: 4
Conference: 4
Book Chapters: 2
Conference Proceedings: 1
Important Publications:
- Bombarde, D., Narayan S.L., Gautam S., and Nandy, A. A Comprehensive Comparative Review of Various Advanced Finite Elements to Alleviate Shear Membrane and Volumetric Locking, Archives of Computational Methods in Engineering. 31:1979–2013. DOI: 10.1007/s11831-023-10050-x
- Bombarde, D., Agrawal, M., Gautam S., and Nandy, A. (2024), Development of quadratic enhanced assumed strain elements for threedimensional linear elasticity, Computers and Structures, 291:107217.DOI:10.1016/j.compstruc.2023.107217.
- Bombarde,D.,, Agrawal, M., Gautam S., and Nandy, A. (2022),Hellinger-Reissner principle based stress-displacement formulation for three-dimensional isogeometric analysis in linear elasticity, Computer Methods in Applied Mechanics and Engineering. 394:114920. DOI:S0045782522001955?dgcid=coauthor
4.
Durgarao Kamireddy
Thesis Title: Improvements of Finite Elements Strategies in Electromagnetic Analysis.
Year: 2017-2024 (Thesis Submitted)
Journals: 3
Conference: 5
Book Chapters: 2
Conference Proceedings: 2
Important Publications:
- Kamireddy, D. Chavan M.S., and Nandy, A.,(2022),Comparative analysis of novel nodal-to-edge finite elements over conventional nodal element for electromagnetic analysis, Journal of Electromagnetic Waves and Applications.1-29.DOI: 10.1080/09205071.2022.2117102
- Kamireddy, D. and Nandy, A.,(2022), A Novel Conversion Technique from Nodal to Edge Finite Element Data Structure for Electromagnetic Analysis, Computer Assisted Methods in Engineering and Science.28(4):291-319.DOI:http://dx.doi.org/10.24423/cames.384
1.
Avinash Chetry
Research Area: Electromagnetic Crimping, Electromagnetic Forming
Year: 2021-
Conferences: 3
2.
Rakesh Panda
Research Area: Analysis in the domain of Vibration and Acoustics
Year: 2021-
Main-supervisor: Prof. Satyajit Panda
Ongoing Students
M.Tech. Students
1.
Thesis Title: Parallelization of FEM codes for Linear Structural Analysis and Incompressible Fluid Flow using PETSc (2018)
Co-supervisor: Prof. A. N. Reddy
2.
Thesis Title: Finite Element Analysis of One-Dimensional Plasticity (2019)
Rucha Milind Pendse
Boyi Naga Durga Prasad
Senior Manager, Tata Motors, Pune, India
Passed-out Students
3.
Dinesh Ray
Associate Content Developer, BYJU's, Bengaluru, India.
Thesis Title: Finite Element Analysis of Electromagnetic Forming and Perforation of Tubes (2019)
Journals: 1
Conferences: 1
Book Chapters: 1
Important Publications:
- Pawar, S., Ray, D., Kore, S.D. and Nandy, A.,(2021). Electromagnetic Forming and Perforation of Tubes: Modeling, Simulation and Validation, Journal of Manufacturing Science and Engineering (ASME), 143(6): 061003. DOI: https://doi.org/10.1115/1.4049090
- Pawar, S., Ray, D., Kore, S.D. and Nandy, A.,(2020). Comparison of Two Different Simulation Methods for the Finite Element Analysis of Electromagnetic Forming and Perforation (EMFP) of Tubes. In Industry 4.0 and Advanced Manufacturing, pp. 99-109. Springer, Singapore. DOI: 10.1007/978-981-15-5689-0_10
4.
Tusar Jit Medhi
Thesis Title: FEM Modelling of Small Strain Plasticity in Two Dimension and Axi-Symmetric Domain (2020)
5.
Parmodh Kumar
Thesis Title: Application of PML for Scattering with Conducting Bodies (2020)
CAE Analyst at Mercedes Benz R&D India Bangalore
6.
Thesis Title: Finite element analysis of electromagnetic crimping on threaded surface of a tubeto-tube joint (2021)
Shafeeque E S
Associate Developer in SAP Labs India
Important Publications:
- Shafeeque, E. S., Kumar, D., Kore, S. D., and Nandy A., (2022), Finite Element Modelling of Electromagnetic Crimping on Threaded Surface. AIP Conference Proceedings 2408(02001):1-9, DOI: https://doi.org/10.1063/5.0072619.
- Shafeeque, E. S., Kumar, D., Kore, S. D., and Nandy, A., (June 11-12, 2021) Finite Element Modelling of Electromagnetic Crimping on Threaded Surface, 3rd International Conference on Sustainable Manufacturing, Materials and Technologies, Coimbatore, India.
Conferences: 1
Conference Proceedings: 1
7.
Thesis Title: Boundary Element Method in Structures and Acoustics (2021)
Conferences: 1
Important Publication:
- Paudel, K., and Nandy, A., (December 16-18, 2021), A comparative study of BEM and FEM in structural analysis, , XVI Vibration Engineering & Technology of Machinery Conference (VETOMAC 2021), Bengaluru, India.
Kushal Paudel
Mercedes R&D
8.
Silla Lakshmi Narayan
Thesis Title: A Comparative Study of Different Mixed Formulations in Finite Element Method (2021)
Journal: 1
Conferences: 1
Book chapters: 1
PGET in R&D, Bajaj Auto Ltd.
Important Publications:
- Bombarde, D., Narayan S.L., Gautam S., and Nandy, A. A Comprehensive Comparative Review of Various Advanced Finite Elements to Alleviate Shear, Membrane and Volumetric Locking, Archives of Computational Methods in Engineering, 31:1979–2013. DOI: 10.1007/s11831-023-10050-x
- Narayan, S. L., Bombarde, D., Gautam, S., and Nandy, A., (2021). Comparison of Selective Reduced Integration, Enhanced Assumed Strain and Assumed Natural Strain formulation in alleviating locking. Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, 619-629. DOI: https://doi.org/10.1007/978-981-19-2188-9_58
9.
Thesis Title: FEM in electromagnetics (2022)
Conferences: 1
Book chapters: 1
Karanam Sreekanth
Software Engineer in Persistent Systems India
Important Publications:
- Karanam S., Kamireddy D., and Nandy,A., (2021). Implementing symmetric boundary condition in electromagnetic harmonic analysis: two different approaches. Advances in Signal Processing, Embedded Systems and IoT, Lecture Notes in Electrical Engineering. Springer, Singapore, 992: 115-125. DOI:https://doi.org/10.1007/978-981-19-8865-3_10
- Karanam S., Kamireddy D., and Nandy,A., (22nd July - 23rd July, 2022), Implementing symmetric boundary condition in electromagnetic harmonic analysis: two different approaches. 7th International Conference on Micro-Electronics, Electromagnetics and Telecommunication, ICMEET 2022.
10.
Thesis Title: Electromagnetic Wave Propagation Simulation (2022)
Journals: 1
Conferences: 1
Conference Proceedings: 1
Saurabh Madhukar Chavan
Software Engineer in Persistent Systems India
Important Publications:
- Kamireddy, D. Chavan M.S., and Nandy, A.,(2022),Comparative analysis of novel nodal-to-edge finite elements over conventional nodal element for electromagnetic analysis, Journal of Electromagnetic Waves and Applications.1-29.DOI: 10.1080/09205071.2022.2117102
- Kamireddy, D., Chavan, M.S., and Nandy A., (2022), Electromagnetic eigen analysis: performance comparison of four node and four edge quadrilateral elements with the effect of distortion. Materials Today: Proceedings 66:1710-1715, DOI: https://doi.org/10.1016/j.matpr.2022.05.434
11.
Thesis Title: Mixed FE formulation to alleviate Volumetric locking in Non - linear analysis with Hyperelastic materials (2022)
Main-supervisor: Prof. Nelson Muthu
12.
Thesis Title: Finite Element Modelling of Finite Strain Consolidation (2023)
Co-supervisor: Prof. T. V.Bharat
Mano Prakyath Havalgi
D Srinivasulu
Load Engineer in Siemens Gamesa India
13.
Thesis Title: Outward Wave Favouring formulation in exterior acoustics: an assessment of its high frequency performan (2023)
Conferences: 1
Important Publication:
- Adhikary, A., Shaw, R., and Nandy, A., ( 5th - 9th February, 2023), Outward Wave Favoring formulation in exterior acoustics: an assessment of its high frequency performance, International Conference on Vibration Problems (ICOVP 2023), Doha, Qatar. Doi: chapter/10.1007/978-981-99-5922-8_10
Arnab Adhikary
Engineer in NTPC India
1.
Working Area: Multistage Forming
2.
Working Area: BEM in Acoustics
K. H. Hari Kishor
Rajat Sharma
Ongoing Students
B.Tech. Students
1.
Swapnil S. Tirpude
2.
Pranay S. Kotkar
Project Title: Design and Development of Compliant Mechanism for Flapping Robot (2019)
Co-supervisor: Prof. Atanu Banerjee
Software Engineer at PhonePe
Passed-out Students
Senior Software Engineer, GEP
Project Title: Design and Development of Compliant Mechanism for Flapping Robot (2019)
Co-supervisor: Prof. Atanu Banerjee
3.
Dasari Raghuprasad
Project Title: Electromagnetic crimping for tube to tube joint using Ansys (2020)
4.
Project Title: Electromagnetic crimping for tube to tube joint using Ansys (2020)
Datti Naveen
Software developer at OYO
5.
Project Title: Static and Transient Analysis of Compliant Mechanism for Flapping Robot (2020)
Co-supervisor: Prof. Atanu Banerjee
6.
Project Title: Static and Transient Analysis of Compliant Mechanism for Flapping Robot (2020)
Co-supervisor: Prof. Atanu Banerjee
Sachin Sharma
Md. Asif Imam
Business Analyst at Affine Analytics
GET at Hindustan Petroleum Corporation Ltd
7.
Project Title: Joining of Cu-SS tube by Electromagnetic Crimping: Deep learning modeling through finite element analysis data (2023)
8.
Project Title: Joining of Cu-SS tube by Electromagnetic Crimping: Deep learning modeling through finite element analysis data (2023)
Ayush Kumar
Priyal Juneja
9.
Project Title: Performance assessment in Electromagnetic Perforation (2023)
10.
Project Title: Performance assessment in Electromagnetic Perforation (2023)
Madhav Dargar
Parth Gadoo
Assistant Project Engineer / Project Engineer
- Functionality Enhancement Through Design and Development of Advanced FE Algorithms for STR Tools
1.
Parmodh Kumar
July 2020 to Oct 2020
2.
Postdoctoral Researcher KTH Royal Institute of Technology
Oct 2020 to Jan 2021
Dr. Vishal Agrawal
CAE Analyst at Mercedes Benz R&D India Bangalore
3.
Rishav Shaw
Ph.D. student at Bundeswehr University Munich
Jan 2021 to July 2021
4.
GET at Larsen & Toubro
Feb 2022 to May 2022
Mahendra Singh
5.
Postdoctoral Researcher, INU South Korea
Aug 2022 to Jan 2023
Dr. Deepak Kumar
Summer Interns
1.
Soumya Mandal
NIT Durgapur
Topic: Developing Matlab codes for creating three-dimensional geometry through revolving some two-dimensional axisymmetric mesh with shift of axis
2.
Rishav Sharma
NITK Surathkal
Topic: Developing Matlab codes for creating three-dimensional geometry through sweeping some two-dimensional mesh
B.Tech student, NITS
May 2019 to July 2019
May 2019 to July 2019
3.
Aakash Kumawat
IIT Ropar
Topic: Finite Element Analysis for Nonlinear Electromechanical systems using COMSOL
Co-supervisor: Prof. Manish Agrawal, IIT Ropar
Feb 2021 to April 2021
4.
PVSS Chaitanya
IIEST, Shibpur
Topic: Some development in HyFem Postprocessor
June 2021 to August 2021
B.Tech student, IIT Ropar
Third Year B.Tech student
5.
Kunalan Murthy
NIT Tiruchirappali
Topic: ANSYS Maxwell and Explicit Dynamics simulation to study the effect of thread angles on the Joint strength of Cu-SS tubular Joints
May 2022 to July 2022
Important Publications:
- Kumar, D., Murthy, K., Kore, S.D., and Nandy, A., (2023), Effect of Thread Angle besides Pitch and Discharge energy in Electromagnetically Crimped Threaded Surfaced Tube-to-Tube Joint: Experimental and Numerical Investigation along with ANOVA Analysis to Assess the Relative Contribution of the Process Parameters. Materials Today: Proceedings , DOI:https://doi.org/10.1016/j.matpr.2023.02.074.
B.Tech student, NIT Trichy
Conferences Proceedings: 1
6.
Vishwajeet Kashyap
Topic: Improvement in ANSYS Explicit Dynamics simulation to study the pull out load for axisymmetric model during EMC to understand on the Joint strength.
B.Tech student, BIT Mesra
7.
Joe Allan M
NIT Tiruchirappali
Topic: ANSYS Explicit Dynamics simulation to study the quality of hole in single and multi-point EMFP of AL6061-T6 tube.
B.Tech student, NIT Trichy
May 2023to July 2023
May 2023 to July 2023
8.
NIT Tiruchirappali
Topic: Performance Improvement in Multi-point Electromagnetic Forming
and Perforation of Al6061-T6 tube using binary coded Genetic
Algorithm
Harsh Sanjay Sakat
B.Tech student, NIT Trichy