Undergraduate Courses                 

• Engineering Mechanics
• Strength of Materials
• Structural analysis
• Basic surveying
• Design of steel structure
• Design of concrete structure
• Civil engineering materials & Construction
• Steel structure lab.
• Concrete lab.  

Postgraduate Courses

• Earthquake and Wind engineering
• Advanced Mechanics of Solids
• Advanced Structural Engineering Lab. 

• Seismic evaluation and Retrofitting of structures
• Supplemental damping and Energy dissipating devices
• Performance-based seismic design of structures
• Fiber-reinforced concrete
• Numerical modeling of reinforced concrete and steel structures

Young Author Best Paper Award: Structural Engineering Convention (SEC), New Delhi, India (2014)
 

Journal Publications

1. Bhartiya, R., Oinam, R. M., Sahoo, D. R., and Kumar U., (2021), “Modified confinement model for monotonic axial behavior of concrete-filled steel tubular columns.” Journal of Constructional Steel Research, 180 (XXX), 106570.
2. Karaiya, B. K., Oinam, R. M., Sahoo, D. R., and Gupta, A., (2020), “Lateral cyclic performance of a CFRP retrofitted two-story RC frame with open ground story.” Bulletin of Earthquake Engineering, 18(13), 5919–5939.
3. Karki, P., Oinam, R. M., and Sahoo, D. R. (2020), “Evaluation of seismic strengthening techniques for non-ductile soft-story RC frame.” Advances in Concrete Construction (ACC), 9(4), 423-435.
4. Oinam, R. M., Kumar, P. C. A., and Sahoo, D. R. (2019), “Cyclic performance of steel fiber-reinforced concrete exterior beam-column joints.” Earthquakes and Structures, 16(5), 533-546.
5. Oinam, R. M., and Sahoo, D. R. (2019), “Using metallic dampers to improve seismic performance of soft-story RC frames: Experimental and numerical study.” Journal of Performance of Constructed Facilities (ASCE), 33(1), 04018108-18.
6. Oinam, R. M., and Sahoo, D. R. (2018), “Numerical evaluation of seismic response of soft-story RC frames retrofitted with passive devices.” Bulletin of Earthquake Engineering, 16(2), 983–1006.
7. Oinam, R. M., and Sahoo, D. R. (2017), “Seismic rehabilitation of damaged reinforced concrete frames using combined metallic yielding passive devices.” Structure and Infrastructure Engineering, 13(6), 816-830.
8. Oinam, R. M., Sahoo, D. R., and Sindhu, R. (2014), “Cyclic response of non-ductile RC frame with steel fibers at beam-column joints and plastic hinge regions.” Journal of Earthquake Engineering, 18(6), 908–928.
9. Oinam, R. M., Sugumar, R., and Sahoo, D. R. (2017), “A comparative study of seismic performance of RC frames with masonry infills”, Procedia Engineering, 173, 1784–1791.
10. Oinam, R. M., and Sahoo, D. R. (2015), “Enhancement of lateral capacity of damaged non-ductile RC frame using combined-yielding metallic damper.” The Indian Concrete Journal, 89(1), 80–86.
11. Oinam, R. M., and Sahoo, D. R. (2015), “Retrofitting of damaged RC frame using metallic yielding damper.” The Bridge and Structural Engineer, Indian National Group of International Association of Bridge and Structural Engineering (ING-IABSE), 45(1), 85–93.

Book Chapter

1. Oinam, R. M., Kumar, P. C. A., Sahoo, D. R., and Maran, K., (2018), "Cyclic behavior of reinforced concrete coupling beams" Recent Advances in Structural Engineering, Volume: I, pp 1063-1072, Springer.
2. Oinam, R. M., and Sahoo, D. R., (2018), "Numerical evaluation of cyclic performance of damaged RC frames using passive devices" Recent Advances in Structural Engineering, Volume: II, pp 687-697, Springer.
3. Oinam, R. M., and Sahoo, D. R. (2015), “Enhancement of lateral capacity of damaged non-ductile RC frame using combined-yielding metallic damper” Advances in Structural Engineering: Materials, Volume: III, pp 2157-2167, Springer.

Conference Proceedings

1. Oinam, R.M., Nadimpally, M. K., and Kunaparaju, P. V. (2020), “Performance-based plastic designed for buckling-restrained braced frames” Proceedings of the 17th World Conference on Earthquake Engineering (17WCEE), Sendai, Japan.
2. Rahul, B., Sahoo, D. R., and Oinam, R. M. (2020), “Influence of length-to-depth ratio on monotonic compression behavior concrete-filled tubular columns” Proceedings of the international federation for structural concrete (FIB) symposium, Shanghai, China.
3. Pandikkadavath, M. S., Mangalathu, S., Oinam, R. M., Kumar, P. C. A., Sahoo D. R. and Krishnan N. M. A. (2020), “Drift response evaluation of buckling-restrained braced frames (BRBFs) under sequential seismic disturbances” Proceedings of the international conference on Materials, Mechanics and Structures (ICMMS), Calicut, India.
4. Pandikkadavath, M. S., Mangalathu, S., Oinam, R. M., Kumar, P. C. A., Sahoo D. R. and Krishnan N. M. A. (2020), “Effect of response modification factor on main shock-after shock (MS-AS) seismic response of buckling restrained braced frames (BRBFS)” Proceedings of the Indian Structural Steel Conference (ISSC), Hyderabad, India.
5. Pandikkadavath, M. S., and Oinam, R. M. (2019), “Effect of response reduction factor R on seismic drift response of buckling restrained braced frames” Proceedings of the Innovative Trends in Civil Engineering for Sustainable Development (ITCSD), Warangal, India.
6. Oinam, R. M., Kumar, P. C. A., and Sahoo, D. R. (2018), “Effectiveness of steel fiber in external beam column joints under cyclic loading” Proceedings of the 16^th Symposium on Earthquake Engineering (16SEE), Roorkee, India.
7. Oinam, R. M., and Sahoo, D. R. (2018), “Pseudo-dynamic testing of RC frame with soft-story strengthened using metallic dampers” Proceedings of the 11^th National Conference on Earthquake Engineering (11NCEE), Los Angeles, CA USA.
8. Oinam, R. M., Karaiya, B. K., Sahoo, D. R., Gupta, A., and Sahoo V. (2018), “Seismic rehabilitation of damaged shear-critical columns of RC frame using CFRP jacketing” Proceedings of the 16^th European Conference on Earthquake Engineering (16ECEE), Thessaloniki, Greece.
9. Oinam, R. M., and Sahoo, D. R. (2016), “Numerical evaluation of cyclic performance of damaged rc frames usings passive devices.” Proceedings of the 10^th Structural Engineering Convention (SEC 2016), Chennai, India.
10. Oinam, R. M., Kumar, P. C. A, Sahoo, D. R., and Maran, K. (2016), “Cyclic behavior of retrofitted reinforced concrete coupling beams” Proceedings of the 10^th Structural Engineering Convention (SEC 2016), Chennai, India.
11. Oinam, R. M., and Sahoo, D. R. (2017), “Pseudo-dynamic testing of large-scale reinforced concrete frame with open ground storey.” Proceedings of the Sixteenth World Conference on Earthquake Engineering (16WCEE), Santiago, Chile.
12. Oinam, R. M., and Sahoo, D. R. (2016), “A comparative study of seismic performance of RC frames with masonry infills.” Proceedings of the Eleventh International Symposium on Plasticity and Impact Mechanics (IMPLAST 2016), Delhi, India.
13. Oinam, R. M., and Sahoo, D. R. (2015), “Analytical prediction of cyclic performance of RC frame structures.” Proceedings of the Tenth Pacific Conference on Earthquake Engineering (10PCEE), Sydney, Australia.
14. Oinam, R. M., and Sahoo, D. R. (2014), “Enhancement of lateral capacity of damaged non-ductile RC frame using combined-yielding metallic damper.” Proceedings of the 9^th Structural Engineering Convention (SEC 2014), Delhi, India.
15. Oinam, R. M., and Sahoo, D. R. (2014), “Cyclic response of damaged non-Ductile SFRC frame fitted with metallic damper.” Proceedings of the 15^th Symposium on Earthquake Engineering (15SEE), Roorkee, India.

Combined Metallic Yielding Device, Status: Filed